Setting lights to different brightness levels for auto Generated Shows
Setting lights to different brightness levels for auto Generated Shows
I'm new to the Wolfmix having just purchased it a few weeks ago. I use 4 different sets of lights in my show; moving heads, wash lights, LED sticks and par up lights. My issue is that when I auto generate my preset shows, all the lights for every show is preset at 100% brightness. This is ok for 3 of my 4 lights except my wash FX2's lights are literally blinding at 100% and I have to manually turn them down to 25% brightness every time I change shows. Which is quite annoying. Is there a way I can program them to stay at 25% brightness for all auto preset shows and keep the others at 100%?
Re: Setting lights to different brightness levels for auto Generated Shows
There is a setting in the global settings that says save dimmer value in preset. Turn this to no. And your set value of 25 will be like that for all your presets.
-
- Posts: 3
- Joined: Mon Jun 09, 2025 12:33 am
Re: Setting lights to different brightness levels for auto Generated Shows
Adjust the preset how you'd like (brightness, colors, effects, etc.), then shift/tap the preset (so it's blinking), then tap again to save. Or, like the previous guy said, un-tick the box he mentioned, and fader value won't change between presets. I prefer to do it manually for each preset, so they don't all look the same.
Re: Setting lights to different brightness levels for auto Generated Shows
Also a good option! Mine is beter for working the lights in a busking way your methode is beter for running the lights auto from preset to preset 

Re: Setting lights to different brightness levels for auto Generated Shows
Thanks Everyone. I'll try out your suggestions.