Setting lights to different brightness levels for auto Generated Shows

General discussion between Wolfmix owners. Checked occasionally by the Wolfmix support team.
VSMDJS
Posts: 2
Joined: Tue Jun 17, 2025 2:31 pm

Setting lights to different brightness levels for auto Generated Shows

Post by VSMDJS »

I'm new to the Wolfmix having just purchased it a few weeks ago. I use 4 different sets of lights in my show; moving heads, wash lights, LED sticks and par up lights. My issue is that when I auto generate my preset shows, all the lights for every show is preset at 100% brightness. This is ok for 3 of my 4 lights except my wash FX2's lights are literally blinding at 100% and I have to manually turn them down to 25% brightness every time I change shows. Which is quite annoying. Is there a way I can program them to stay at 25% brightness for all auto preset shows and keep the others at 100%?
Kevin88
Posts: 86
Joined: Thu Nov 28, 2024 6:31 pm
Location: Netherlands

Re: Setting lights to different brightness levels for auto Generated Shows

Post by Kevin88 »

There is a setting in the global settings that says save dimmer value in preset. Turn this to no. And your set value of 25 will be like that for all your presets.
mysteryboy28
Posts: 3
Joined: Mon Jun 09, 2025 12:33 am

Re: Setting lights to different brightness levels for auto Generated Shows

Post by mysteryboy28 »

Adjust the preset how you'd like (brightness, colors, effects, etc.), then shift/tap the preset (so it's blinking), then tap again to save. Or, like the previous guy said, un-tick the box he mentioned, and fader value won't change between presets. I prefer to do it manually for each preset, so they don't all look the same.
Kevin88
Posts: 86
Joined: Thu Nov 28, 2024 6:31 pm
Location: Netherlands

Re: Setting lights to different brightness levels for auto Generated Shows

Post by Kevin88 »

Also a good option! Mine is beter for working the lights in a busking way your methode is beter for running the lights auto from preset to preset :)
VSMDJS
Posts: 2
Joined: Tue Jun 17, 2025 2:31 pm

Re: Setting lights to different brightness levels for auto Generated Shows

Post by VSMDJS »

Thanks Everyone. I'll try out your suggestions.
Post Reply