Colour problem fw2

[Kevin88]

Looks like in the new update when I choose a colour on a colour wheel fixture it doesn’t set it dmx value.

Tested it when choose a couler check the value screen than change colour but still the same value.

[Kevin88]

Seems to work now!

I fount that when using blackout the colour wheel goes to open but the light isn’t dimming & strobe isn’t responding.

This is only with the moving fixture with colour wheel. The led pars working normally.

Also found that the gobo screen sometimes show the correct
Gobos and sometimes just show gobo 1 etc

[Hulg]

I have the same problem.

And I have the problem that I can't adjust colors in the static area. I can't equalize the mix in RGBW and set it to pure white.

Nothing reacts.

[Kevin88]

Maybe a good idea to add would be the option to map live edit pages same as the preset pages.

And the option to midi map the live edit buttons

[Kevin88]

Just found that positions after reopening a project once you’ve been in a different project set the fan setting different

[Kevin88]

Also found that it only keeps the setting for selected move effect the other are going back to a standard setting. This isn’t super usefull cause when it remembers it you can always set a slow setting for example in a slow part in a song. Before it remembered all the settings of every for example move option

[willm]

Seems to work now!

I fount that when using blackout the colour wheel goes to open but the light isn’t dimming & strobe isn’t responding.

This is only with the moving fixture with colour wheel. The led pars working normally.

Also found that the gobo screen sometimes show the correct
Gobos and sometimes just show gobo 1 etc

Hello! Thanks for the report. Would you please be able to confirm the exact name and brand of the fixture profile you are using here so that I can check this for you?

Regarding the Gobo point- it might be the case that the fixture does not have any specific Gobo information. This is usually due to a lack of specific info provided in the user manual of the fixture (for example- they tell us that 'Gobo 1' is value 'XXX-YYY', but they don't say exactly what 'Gobo 1' looks like). I can check this for you once the fixture name is provided.

Maybe a good idea to add would be the option to map live edit pages same as the preset pages.

And the option to midi map the live edit buttons

I will log the idea about mapping Live Edit pages for consideration in future updates!

Mapping Live Edits is currently not directly possible, however it is possible to set this up indirectly through the Preset screen:

- Activate your Live Edit(s)
- Go to Presets > scroll to the page you want to set up for Live Edit triggers
- Save your Preset to a new slot, disable Colour, Move and Beam.
- Now- the only things included in your Preset will be the active Live Edits, Gobos and Dimmer values.
- You can not map this Preset to your MIDI controller.

Just found that positions after reopening a project once you’ve been in a different project set the fan setting different

I'm not able to reproduce this one, could you please send over a video demonstrating the problem (you may need to use a file sharing service such as Google Drive or WeTransfer.com).

Also found that it only keeps the setting for selected move effect the other are going back to a standard setting. This isn’t super usefull cause when it remembers it you can always set a slow setting for example in a slow part in a song. Before it remembered all the settings of every for example move option

I've reproduced this and reported it to the developers to look into, thanks!

[willm]

I have the same problem.

And I have the problem that I can't adjust colors in the static area. I can't equalize the mix in RGBW and set it to pure white.

Nothing reacts.

Hello!

What is the exact name and brand of the fixture that you are using so that we can try to reproduce this? It would also be helpful to see a video demonstration of the problem if possible (you might need to send this over through a file sharing service such as Google Drive or WeTransfer.com).

[Kevin88]

Colours work now normally since the last 2.0.3 I found.

The live edit mapping is especially usefull for flash live edits to have the on buttons easy to access and not the need to go to the live edit page

[Kevin88]

Oh en I found that the preset doesn’t remember when you’ve set a encoder for example zoom. This isn’t stored in the preset as was before.

Ahh I’ll wait a bit longer till I’m using it for now 1.2.6 works better for me