Hi,
The ADJ Entour Venue will not respond to the Smoke buttons knobs at all when you set it up in 2 channel mode on the Wolfmix, setting it as either 1 or 4 channels will allow the Intensity settings to turn up the smoke amount along with setting the fans at a faster speed up to 30% but you cannot change the fan speed independantly from the Wolfmix on either settings (dmx 1 is Smoke Volume, 2 is Fan Speed, 3 is Duration for timer and 4 is the Interval - all 4 work when editing the dmx values so it's not an issue from the actual dmx side).
Running the 2.0.4 firmware but this was similar before 2.0 also.
ADJ Entour Venue - Smoke machine, several profile issues
-
- Posts: 4
- Joined: Thu Apr 24, 2025 10:34 pm
Re: ADJ Entour Venue - Smoke machine, several profile issues
ADJ has most likely provided a more general profile, rather a specific profile explicitly tailored to run on Wolfmix.
A look at the profile reveals that in all 3 Modes only channel 1 is correctly labelled as a Smoke channel, so Wolfmix can identify (and work) for Smoke Volume.
You can edit Mode 2 (2ch) using the Profile Builder (cloud.nicolaudiegroup.com) to also include the Fan function. Wolfmix only support up to 2 channel Fog/Hazer (Smoke volume + Fan Speed). For more channels (e.g. Mode 3) you may want to create additional Live Edits for.
A look at the profile reveals that in all 3 Modes only channel 1 is correctly labelled as a Smoke channel, so Wolfmix can identify (and work) for Smoke Volume.
You can edit Mode 2 (2ch) using the Profile Builder (cloud.nicolaudiegroup.com) to also include the Fan function. Wolfmix only support up to 2 channel Fog/Hazer (Smoke volume + Fan Speed). For more channels (e.g. Mode 3) you may want to create additional Live Edits for.
-
- Posts: 4
- Joined: Thu Apr 24, 2025 10:34 pm
Re: ADJ Entour Venue - Smoke machine, several profile issues
Perfect, cheers axell - Will do!