Search found 365 matches
- Fri May 24, 2024 3:51 pm
- Forum: Wolfmix Owners Forum
- Topic: How to copy presets between pages?
- Replies: 1
- Views: 2
Re: How to copy presets between pages?
hold SHIFT and select the "source"Preset" (starts flashing), dial to "target" page, hold SHIFT and select "target Preset" (starts flashing) - press Preset again to confirm - done
- Thu May 23, 2024 3:24 pm
- Forum: Wolfmix Owners Forum
- Topic: Apply live-edit to all presets
- Replies: 1
- Views: 18
Re: Apply live-edit to all presets
For FOCUS you can use a) POSITION and enter into each of the 10 Position Presets your "adjusted" FOCUS setting. Then you have 10 different Focus settings (PER Fixture Groups!) while you can freely change your Presets without change the Focus. b) did you notice the FOCUS Rotary encoder in t...
- Thu May 23, 2024 5:58 am
- Forum: Wolfmix Owners Forum
- Topic: Where ist the HOLD Option at the preset Page gone?
- Replies: 6
- Views: 68
Re: Where ist the HOLD Option at the preset Page gone?
Random mode is Random per page
ALL mode is all Presets (in all pages) sequentially.
ALL mode is all Presets (in all pages) sequentially.
- Wed May 22, 2024 5:26 pm
- Forum: Wolfmix Owners Forum
- Topic: LED Bar Beams Bug
- Replies: 3
- Views: 1597
Re: LED Bar Beams Bug
Sorry, my fault ...you can't have multiple of the same beam numbers assigned in a single profile or they will "block" each other, showing a value of 127 (what you now see). You have to work with the 16 "blocks ( = 16 beams) and Wolfmix is correctly stepping thru it - no bug. Unfortuna...
- Wed May 22, 2024 4:07 pm
- Forum: Fixtures Behaving Badly
- Topic: china copy like the chauvet gigbar ils
- Replies: 2
- Views: 21
Re: china copy like the chauvet gigbar ils
in order to make a profile to "split" you need to assign "beams" to the "functional groups". These "beams have to be in strict SEQUENTIAL order (from 1 - to - 7 ...and not 1; 4; 2; 3; ..!) Also the profile does not allow channels with "multiple" beam assi...
- Tue May 21, 2024 12:25 pm
- Forum: Wolfmix Owners Forum
- Topic: Where ist the HOLD Option at the preset Page gone?
- Replies: 6
- Views: 68
Re: Where ist the HOLD Option at the preset Page gone?
HOLD & FADE times are being set, when you want to (auto-) PLAY Presets one after another by ROW or by COLUMN, by PAGE or ALL, according to the setting of the PAUSE/PLAY encoder in the Preset page. you give HOLD and FADE each a time - HOLD is how long the Preset will be "active / holded"...
- Sun May 19, 2024 8:37 am
- Forum: Fixtures Behaving Badly
- Topic: Eurolite PARty TCL Spot
- Replies: 1
- Views: 34
Re: Eurolite PARty TCL Spot
This probably has been fixed in a newer version of the profile available from the Online Library. Delete the PARty TCL Spot profile from the Wolfmix, open WTOOLS on the computer and "sync" the new version to your Wolfmix. Channel 5 (Strobe) now has a default of 000 (being Off) You can also...
- Sat May 18, 2024 2:25 pm
- Forum: Wolfmix Owners Forum
- Topic: Where to FLIP the fixture order?
- Replies: 7
- Views: 77
Re: Where to FLIP the fixture order?
if you run it in SPLIT mode, you have already "individual" µFixtures as a "single instance". When SPLIT, you have separate Position entries you simply want to "move" - no need to FLIP. You need to have a fixture with multiple "beams" configured, then you can o...
- Sat May 18, 2024 4:11 am
- Forum: Wolfmix Owners Forum
- Topic: Where to FLIP the fixture order?
- Replies: 7
- Views: 77
Re: Where to FLIP the fixture order?
To "FLIP" a Moving Head does not make any sense, as you only have ONE BEAM (one light source)! What do you expect to see when you change the order of this single light? You can "FLIP" a LED Bar with 18 LEDs, where you invert the "order". Imagine a "chase effect&quo...
- Fri May 17, 2024 9:26 pm
- Forum: Wolfmix Owners Forum
- Topic: Where to FLIP the fixture order?
- Replies: 7
- Views: 77
Re: Where to FLIP the fixture order?
If you MOVE fixtures to ANOTHER POSITION, this will change the "sequence" when the fixture in general will be affected by the FX. If you select FLIP, this will INVERT the BEAM ORDER inside of a fixture. Example: 3x LED Bars with 8 LEDs each: Position 1 - Bar 1 (LEDs 1-8) Position 2 - Bar 2...