Wolfmix

change colors - hold SHIFT and select a color to enter Color Picker (editor). Adjust your R,G,B,W, A,U levels as you like. You have 10 Color preset slots per Group, If you create a Preset using one of the Color slots, you save the actual Color slot with its Color inside. If you then change the Color...

load your project you want to have a copy from into Wolfmix. Go to HOME / SETUP / PROJECTS, select SAVE, select (highlight) another row, push SAVE again and give it a name. Now you have a complete copy of your project under 2 names. If you want to delete a project, use WTOOLS, select PROJECTS tab an...

You need a working profile for the SHEHDS 19x15W. The profiles in the online library are not always optimized to work on Wolfmix "out-of-the-box". The profile collection also is serving other Nicolaudie platforms/controllers, so the profiles in the library are mostly "universal"a...

hold SHIFT and select the "source"Preset" (starts flashing), dial to "target" page, hold SHIFT and select "target Preset" (starts flashing) - press Preset again to confirm - done

For FOCUS you can use a) POSITION and enter into each of the 10 Position Presets your "adjusted" FOCUS setting. Then you have 10 different Focus settings (PER Fixture Groups!) while you can freely change your Presets without change the Focus. b) did you notice the FOCUS Rotary encoder in t...

Random mode is Random per page
ALL mode is all Presets (in all pages) sequentially.

Sorry, my fault ...you can't have multiple of the same beam numbers assigned in a single profile or they will "block" each other, showing a value of 127 (what you now see). You have to work with the 16 "blocks ( = 16 beams) and Wolfmix is correctly stepping thru it - no bug. Unfortuna...

in order to make a profile to "split" you need to assign "beams" to the "functional groups". These "beams have to be in strict SEQUENTIAL order (from 1 - to - 7 ...and not 1; 4; 2; 3; ..!) Also the profile does not allow channels with "multiple" beam assi...

HOLD & FADE times are being set, when you want to (auto-) PLAY Presets one after another by ROW or by COLUMN, by PAGE or ALL, according to the setting of the PAUSE/PLAY encoder in the Preset page. you give HOLD and FADE each a time - HOLD is how long the Preset will be "active / holded"...

This probably has been fixed in a newer version of the profile available from the Online Library. Delete the PARty TCL Spot profile from the Wolfmix, open WTOOLS on the computer and "sync" the new version to your Wolfmix. Channel 5 (Strobe) now has a default of 000 (being Off) You can also...