Wolfmix

Firstly, love the platform

Status. Current Fimware 1.2.2
Factory reset.
New Project
Two groups: A (LED Pars) B (Moving Heads)
4 fixtures in each group
DMX Addresses assigned correctly no overlap
Channel Settings assigned correctly in the fixture menu

Observation:
If the DMX addresses of the moving heads are higher than the DMX addresses of the LED Par fixtures then all fixtures operate with no issues.

If the DMX addresses of the moving heads are lower than the DMX addresses of the LED Par fixtures then the LED Pars become unresponsive

Conclusion: The compiled DMX stack output is flawed and address/channel mixing is occurring. Or is there something I’m missing.

Interesting observation:
All fixtures using SOUNDSWITCH FUNCTION PERFECTLY WITH OTHER FIXTURES irrespective of DMX addressing.

I would recommend to open a ticket with your findings.....with a ticket number it becomes "officially"
Although yet I never came across this behavior - using all sort of different configurations with Moving Heads and PARs mixed at the front or at the back of the DMX address chain.

https://help.wolfmix.com