Wolfmix

Hi all
We are having trouble with making a Eurolite Mega strobe 768 using the profile from cloud.
This fixture is a led-bar with rgb beams and seperate white beams on their own channel.

White beams are not visibles/created in the Beam editor, whar are we missing ?
We see 32 channels (RGB) but we are missing the rest wich is White/Strobe

Also, if this makes no sense, does anyone have the fixture, and a working profile for it ?

Example: Create your own profile for 257Ch mode. Make it a "2 part profile" and divide in 2 "micro"-profiles, and load both next to each other to get the 257Ch count.

pt1of2 = 64x RGB (beam 1-64)
pt2of2 = 64x White (beam 1-64) + Frost (all beams)

Now you load pt1of2 into Wolfmix (Split? deny [NO]) - loading ch 1- ch192
Load immediately pt2of2 next to pt1 into Wolfmix - loading ch 193 - ch 257

You can now assign Whites (pt2of2) to another Group for individual control. Strobe is supplied by Wolfmix automatically for "Color-Dimmer" profiles. You can enable/disable Strobe or Blinder in HOME / SETUP / GROUPS for the corresponding Groups.

Thx a lot, Will try that