Chauvet - Scorpion Storm RGBY
Posted: Tue Apr 16, 2024 6:23 pm
Cannot figure out how to control the laser colors separately in either the color section or colorFX. Would like to be able to at least control the Red/Green/Blue/Yellow separately. I've tried adjusting the DMX Values and I'm having limiited success.
Main issues:
I can put the laser in sound program (value 101-150) and get all the colors and it reacts to sound as it should. no control over color options
I can get channel 4 to show red only (value 5-10) but that's it.
Channel 5 - 7 won't allow me to change the values to get the GBY
I've tried switching it to value 151-200 for DMX mode 1 and 201-255 for DMX mode 2. Did not notice any difference.
I even deleted the fixture and installed under 5-Channel mode. Same issues.
Main issues:
I can put the laser in sound program (value 101-150) and get all the colors and it reacts to sound as it should. no control over color options
I can get channel 4 to show red only (value 5-10) but that's it.
Channel 5 - 7 won't allow me to change the values to get the GBY
I've tried switching it to value 151-200 for DMX mode 1 and 201-255 for DMX mode 2. Did not notice any difference.
I even deleted the fixture and installed under 5-Channel mode. Same issues.