Wtools 1.53
-
Deejaygaz67
- Posts: 1
- Joined: Wed Jan 31, 2024 12:15 pm
Wtools 1.53
Update just freezes and sticks at 33%
Re: Wtools 1.53
What version are you currently using?
If it is too old it can fail to update to the latest.
Download manually from the Wolfmix website https://www.wolfmix.com/en/download and install that WTOOLS version first. THEN you can update from here to the latest WTOOLS version (1.5.3)
If it is too old it can fail to update to the latest.
Download manually from the Wolfmix website https://www.wolfmix.com/en/download and install that WTOOLS version first. THEN you can update from here to the latest WTOOLS version (1.5.3)
-
GeorgeStinc
- Posts: 2
- Joined: Mon Feb 05, 2024 1:39 pm
- Location: Russia
- Contact:
Fixtures Behaving Badly.
Have any users experienced unusual or unexpected behavior from their fixtures while using the software? If so, what were the specific issues encountered and were there any workarounds or solutions found?
ограничители перенапряжения опн https://energy-21.ru/katalog/opn/category/opn-330-kv опн ухл1
Re: Wtools 1.53
No - haven't seen any unexpected behavior when upgrading. The 1.5.3 version is more stable as previous versions.
But as always: make sure everything (Projects & Fixtures) are stored in the Cloud (+ on the computer) using the Backup button, before you do any major changes. (although it should not have any impact when upgrading WTOOLS is failing - WTOOLS is "just the communication" between Wolfmix/WMX1 and Cloud).
The new interface is slightly better structured, provide better information and "clearer". I only miss the "delete all fixtures" (from Wolfmix/WMX1) from the Settings tab. This s now "hidden" in the DEBUG Mode of WTOOLS - you enable/disable by hitting SHIFT+CMD+"D".
But as always: make sure everything (Projects & Fixtures) are stored in the Cloud (+ on the computer) using the Backup button, before you do any major changes. (although it should not have any impact when upgrading WTOOLS is failing - WTOOLS is "just the communication" between Wolfmix/WMX1 and Cloud).
The new interface is slightly better structured, provide better information and "clearer". I only miss the "delete all fixtures" (from Wolfmix/WMX1) from the Settings tab. This s now "hidden" in the DEBUG Mode of WTOOLS - you enable/disable by hitting SHIFT+CMD+"D".