Wolfmix

Hi Axel I can use this DMX table with the Wlink?

Yes you can. You can use Fader 1-8 for dimming Groups A - H and Fader 9 (Page 2 Ch1) for dimming master. Use for that manual mode

See this video: https://www.youtube.com/watch?v=Q6aZ5yG3EMw

You can use up to all 40 channels to control channels in you project with. Just make sure you "send" the correct fader on the correct channel by selecting the 5 buttons on the left (1=ch1-ch8; 2=ch9-ch16; 3=ch17-ch24 and so on).
You can also rearrange the receiving channels for dimmer or other channels and put on channels as you like, i.e putting Group Dimmer on Fadergroup 5 with channels ch33-ch40. You are free to assign to any channel between 001 to 255 (having a desk with 255 faders)

thank you Axell and Simons for the answer.