Page 1 of 1
Problem with WLINK - Preset Jump DMX IN
Posted: Mon Oct 16, 2023 2:28 pm
by MisterDoc
Hello Wolfmix Team,
I think since the last updates (don't know exactly, maybe 1.1.2 worked for me) the preset jumps don't work anymore with my Stairville DMX-Foot2.
I've tried all possible settings, but the presets switch always to anywhere. Once two forward and two back, another time one row down and so on.
I had a few gigs in the summer and all worked fine (firmware 1.1.2).
Thank you!
Re: Bug in Preset Jump DMX IN? (WLINK)
Posted: Tue Oct 17, 2023 6:46 am
by axell
There seem to be an issue in one of the newer firmware releases with WLINK activities, (sort of) confirmed by support
viewtopic.php?p=2389#p2389
Re: Bug in Preset Jump DMX IN? (WLINK)
Posted: Fri Oct 20, 2023 3:16 pm
by MisterDoc
WLINK bug not fixed yet?
Re: Problem with WLINK - Preset Jump DMX IN
Posted: Mon Nov 06, 2023 10:33 am
by MisterDoc
Please Wolfmix Team,
I need to fix this.
Beta 0.75 and beta 1.0 works great with the preset jump, but I can't open my latest projects saved in version 1.7.
I have to play three times this week, but the WLINK is useless for me
Regards
Helmut
Re: Problem with WLINK - Preset Jump DMX IN
Posted: Fri Nov 10, 2023 9:35 am
by Simon
This should be fixed in V1.1.8. Please let me know if there are still issues with this version. Sorry it took a while, it was only reproducable with certain controllers and was quite a tricky one to solve.
Re: Problem with WLINK - Preset Jump DMX IN
Posted: Fri Nov 10, 2023 10:39 am
by MisterDoc
Sorry Simon, but this didn't fix the problrm. It's just like befor. Not working
Re: Problem with WLINK - Preset Jump DMX IN
Posted: Fri Nov 10, 2023 10:57 am
by axell
MisterDoc wrote: ↑Fri Nov 10, 2023 10:39 am
Sorry Simon, but this didn't fix the problrm. It's just like befor. Not working
MisterDoc, is maybe your DMX Jump setting still active assigned for one channel, so it jumps "around" ? The "flickering" and the reassigning of the Main DMX IN channel has been fixed. I can now normally control the Group Dimmers with my external DMX fader desk.
Re: Problem with WLINK - Preset Jump DMX IN
Posted: Fri Nov 10, 2023 11:30 am
by MisterDoc
Axell, my DMX jump is active, cause I need preset jump with my footswitch, but the update didn't fix that.
It's all like before.
Re: Problem with WLINK - Preset Jump DMX IN
Posted: Fri Nov 10, 2023 12:15 pm
by axell
Try on a fresh project and then add WLINK first and then your DMX Jump and see if it is the Project which may cause the issue ...
Re: Problem with WLINK - Preset Jump DMX IN
Posted: Wed Nov 15, 2023 5:55 pm
by MisterDoc
The answer from Wolfmix Team (Will Maskell) which fixed my problem at the right time:
The issue here was that even though the 'Preset DMX IN channel' parameter was set to ' - ', there was a hidden value set- so the 'Preset DMX IN channel' setting and the 'Preset Jump DMX IN channel' setting were clashing with each other and causing some strange behaviour. This was resolved by scrolling the value for 'Preset DMX IN channel' to the right, then resetting the value to ' - '.