Wolfmix

If I am not online the OS2L not transmitted to the controller.
The Ableton Link works fine offline-online too.
Myc Ventura 13.2.1, VIRTUAL DJ latest (build 7482), wtools latest (1.4.1), firmware on Wolfmix 0.6.7.
(Firmware not updated yet, afraid to loose all settings).

If I start Wtools in online status (Mac is online) then choosing OS2L port 5000 works fine.
When I switch to offline (practically switch wifi off) then tools error coming up 5 times (see attachment).

It looks only working if Wtools is online.
In offline status started wtools missing the upper right corner the login symbol....unable to login to wtools, however the controller connected and started fine.

Any idea how to resolve this?

Thanks,

update firmware to 0.7.5. or you run an older firmware on Wolfmix with latest version of WTOOLS = can cause issues.
Before starting the update: (auto-) Backup Fixtures and Projects into the Nicolaudie Cloud, just click the Backup button in WTOOLS in Fixture tab and in Projects tab - and you are save
Under normal circumstances the update should not destroy any data on the Wolfmix. I did quite a few updates already.

Now upgraded to the latest firmware, wtools also latest.
Problem stay, as before upgrade:(

During wtools online, OS2L switched on, from VDJ BPM overtaken as should be.
I switch off wifi (no internet) then immediately same error pops up posted above.

Tested with Ableton Link connection, works fine even wifi switched off.
It looks OS2L needs to be online
But can be strange is we loose the internet, then loose the bpm synchro too.

Please other user confirm if this exist at your setup too.
Thanks

Same here, wtools is showing error when laptop is going offline mode, but if i restart wtools it runs ok in offline mode too.