Wolfmix

leesinthemix wrote: ↑Tue Feb 14, 2023 1:16 pm You can already save Gobo and Gobo Rotation settings into a preset.

1) Press the Preset you want to save these settings to.
2) Hit the Gobo section, and choose the Gobo you'd like, plus dial in the rotation amount.
3) Overwrite/Save that same Preset.
4) When you next press that Preset, the Gobo settings will be recalled.

I do however agree we need the option to save prism/iris/zoom settings from the Live Edit section into a preset.
There are currently two modes for Live Edits - Unlocked mode and Locked mode. Another mode for saving to presets would be very handy and welcome!

As a workaround, if you have an external DMX board with buttons, you can always map the DMX channel of the fixture's prism setting to this board using the learn function. Set the default value to the DMX value of your desired prism setting.
This way you can select the Preset and Prism setting at the same time, using two fingers and without the faff of using two different sections of the W1 UI.

Linking Wolfmix with DMX boards: https://www.youtube.com/watch?v=Q6aZ5yG3EMw&t=1s

Make sense?

Justsash wrote: ↑Thu Mar 02, 2023 2:07 am I already considered and rejected doing this, because I want to just hit a preset and get back to mixing.

My point again, the W1 should be just as capable as light rider on tablets. It doesn’t seem like I’m asking for much from the development team.

leesinthemix wrote: ↑Thu Mar 02, 2023 12:37 pm

Justsash wrote: ↑Thu Mar 02, 2023 2:07 am I already considered and rejected doing this, because I want to just hit a preset and get back to mixing.

My point again, the W1 should be just as capable as light rider on tablets. It doesn’t seem like I’m asking for much from the development team.

You considered and rejected the exact solution which fulfils your needs?

Once the Gobo settings have been saved to a preset, you just recall them each time by selecting the preset.
My method does EXACTLY what you are asking.

What am I not understanding here?

Justsash wrote: ↑Thu Mar 02, 2023 2:00 pm I absolutely reject your solution of connecting another piece of equipment into a product that has a main selling point of being a standalone lighting controller. What you’re missing is the point of my post which was the use of prisms. Please don’t reply to any of my posts. I don’t want to have to explain simple requests, just because you have problems understanding them.