Wolfmix

Hello there,
i just bought my Wolfmix and i'm interested on using the Wlink feature for connecting my Lightshark ls-1 as a fader controller and DMX thru.
Since Wlink "original" cable is too short and i need to build a longer one, is there someone here who knows the pinout connections of the cable or any special feature (i.e. electronics) built inside it?

Thanks!

For DMX IN you just need to connect a standard DMX cable from your LS to your WM. The only difference is that you need an adapter like this:
https://www.neutrik.com/en/product/na5mm-b

nice to hear it's so simple ! thank you very much for the answer