Wolfmix

Fw 0.6.2
In color fx the color pad button background,white color is wrong presented in selected status.
Fixture is RGBW, if i set the white color to 100% white,the rgb all to 0% then the dimmed white is ok, if i switch on then the button color will be light green, not white.
In general color definitions part, the buttons off and on status represented ok, also in case of white.
This can be disturbing, if white is chosen in color fx, and light up as green.
This is only with fixtures where extra white channel used as pure white (rgb is set to 0)

I can't reproduce this one. Could you check it with 0.6.4 and also try on different button pads and on the color screen?

Hi!

Updated to 0.6.4 but nothing changed.

Please look the following short video:
https://drive.google.com/file/d/17N4V_6 ... sp=sharing
better quality (little bright but still green the white button):
https://drive.google.com/file/d/17xQIvC ... sp=sharing

I hope that helps to understand what I mean...
IF RGB also set to 100% then buttonholer presented OK, but if I change to RGB to 0, but white (W) to 100% then presented as light green (if pressed)
This is only at color FX section (if you here change the color).


Thanks

It strange that I can't reproduce this. Does it happen with a brand new project?