Re: Sound to light beat detection
Posted: Wed Jan 18, 2023 8:29 pm
Hey guys is there an actual solution to this that I'm not understanding?
I've set my ADJ Mega Flash 800W Strobe Light to listen for the Line In for sound to beat detection to no satisfaction.
So I opted for the built in microphone on the WMX1 but it was also a no go.
Interestingly enough the microphone display on the screen lights up when the beat is detected and when I tap on the microphone.
So the WMX1 is detecting the beat but the strobe light is not reacting, instead it flashes at a constant flash every 4-5 seconds.
It will not detect Lows, Mids or Highs.
Link to manual here: https://d295jznhem2tn9.cloudfront.net/I ... AN2005.pdf
The strobe has dipswitches 1-10.
So dipswitch 1 is set to ON as the default channel to communicate to and 10 (DMX enable option) is set to ON as well (as per the manufacture).
Channel 1 is set to strobe (fixture settings as pre loaded from library)
Min 0 Max 255
Channel 2 is set to dimmer (fixture settings as pre loaded from library)
Min 0 Max 255
Am I missing something?
What can I do to get the strobe to react and listing to Line In or the microphone and jump the to rhythm of the song being played?
I've set my ADJ Mega Flash 800W Strobe Light to listen for the Line In for sound to beat detection to no satisfaction.
So I opted for the built in microphone on the WMX1 but it was also a no go.
Interestingly enough the microphone display on the screen lights up when the beat is detected and when I tap on the microphone.
So the WMX1 is detecting the beat but the strobe light is not reacting, instead it flashes at a constant flash every 4-5 seconds.
It will not detect Lows, Mids or Highs.
Link to manual here: https://d295jznhem2tn9.cloudfront.net/I ... AN2005.pdf
The strobe has dipswitches 1-10.
So dipswitch 1 is set to ON as the default channel to communicate to and 10 (DMX enable option) is set to ON as well (as per the manufacture).
Channel 1 is set to strobe (fixture settings as pre loaded from library)
Min 0 Max 255
Channel 2 is set to dimmer (fixture settings as pre loaded from library)
Min 0 Max 255
Am I missing something?
What can I do to get the strobe to react and listing to Line In or the microphone and jump the to rhythm of the song being played?