Feature Request: More than one FX per FX-Rack
Posted: Fri Oct 22, 2021 9:33 am
Hi,
I wish I could use two (or more) different Move-FXes or Color-FXes or Beam-FXes to assign to different groups.
For Example:
Move-FX1 = Circle > Group 2 for MH Spots
Move-FX2 = Up and Down > Group 3 for MH Washes or MH Beams or LED-Bars with Tilt-effect.
Beam-FX1 = Chaser1 > Group 1 for LED Spots
Beam-FX2 = Chaser2 > Group 2 for MH Spots to change dimmer output
Color-FX1 = Color-Change1 > Group 1 for LED Spots to change Color during Beam-FX1
Color-FX2 = Color-Change2 in slow speed for Group 4 for Ambient Lights in the Room.
Only one FX per Rack reduces the system to a 2-3 fixture control-device... I don't know what I should do with 8 groups and 4 possible dmx-lines, when I cannot assign additional FXes for different fixture-types/groups.
So for me 2 FXes per Rack would enough for the use-cases I need the wolfmix w1.
Its a cool device.. I hope some restrictions are still being eliminated in the future.
I wish I could use two (or more) different Move-FXes or Color-FXes or Beam-FXes to assign to different groups.
For Example:
Move-FX1 = Circle > Group 2 for MH Spots
Move-FX2 = Up and Down > Group 3 for MH Washes or MH Beams or LED-Bars with Tilt-effect.
Beam-FX1 = Chaser1 > Group 1 for LED Spots
Beam-FX2 = Chaser2 > Group 2 for MH Spots to change dimmer output
Color-FX1 = Color-Change1 > Group 1 for LED Spots to change Color during Beam-FX1
Color-FX2 = Color-Change2 in slow speed for Group 4 for Ambient Lights in the Room.
Only one FX per Rack reduces the system to a 2-3 fixture control-device... I don't know what I should do with 8 groups and 4 possible dmx-lines, when I cannot assign additional FXes for different fixture-types/groups.
So for me 2 FXes per Rack would enough for the use-cases I need the wolfmix w1.
Its a cool device.. I hope some restrictions are still being eliminated in the future.