Page 1 of 1
Showtec Phantom 65 & Phantom 100
Posted: Sun Mar 21, 2021 10:17 pm
by DJ-T
With the Showtec Phantom 65, the WOLF & Blinder effect do not work.
Re: Showtec Phantom 65
Posted: Mon Mar 22, 2021 6:56 pm
by Simon
Wolf and blinder will just control the dimmer channel on this fixture. I thought about spinning the color wheel to white but was thinking it would look messy. Happy to hear what others think though....
Re: Showtec Phantom 65
Posted: Tue Mar 23, 2021 8:32 pm
by DJ-T
With both effects, the lamp remains on anyway.
I therefore find it strange when everything else is white and another colour is displayed here.
Re: Showtec Phantom 65
Posted: Tue Mar 23, 2021 9:28 pm
by DJ-T
Update with firmware 0.2.9
Wolf and blind effect work, but only if the dimmer is not set to 100% beforehand.
Re: Showtec Phantom 65
Posted: Wed Mar 24, 2021 3:11 pm
by Simon
So it's all good?
Re: Showtec Phantom 65 /Phantom 100
Posted: Sat Mar 27, 2021 2:44 pm
by DJ-T
Test again today with firmware 0.3.0
The WOLF effect does not work when the dimmer is set to 100%. No flashing can be seen.
and the colour pink is not correctly deposited
The same problem also exists with the Showtec Phantom 100
Re: Showtec Phantom 65 & Phantom 100
Posted: Fri Apr 01, 2022 10:19 pm
by wurlitzer
IT This resolved?
Re: Showtec Phantom 65 & Phantom 100
Posted: Fri Apr 22, 2022 2:12 pm
by Simon
I've made some updates to the pink channel and also the shutter channel. It should work better now.
Re: Showtec Phantom 65 & Phantom 100
Posted: Sun Jul 24, 2022 10:34 am
by DJ-T
Test with current profile and FW 0.6.6
Pink now works correctly with Phantom 65 & 100.
The WOLF effect still does not work when the lamp is at 100%, so the brightness has to be turned down a lot for the effect to be visible.
The colour UV is not displayed correctly on the Phantom 65, only light blue is used.
Re: Showtec Phantom 65 & Phantom 100
Posted: Wed Sep 21, 2022 2:53 pm
by willm
Hello,
- The latest version of the Phantom 65 should enable you to use the UV colour correctly, please re-sync the profile via WTOOLS to use the latest version.
- We are currently working on an update for the Wolf flash effect which will address this issue with some fixtures being unaffected by the Wolf button. This should be ready in the next Firmware update. We would love to hear your thoughts on the updated function as and when the new firmware is released!
Kind regards,
Will