LED Moving Head (China)

[battihu]

Hi!
I tried to do profile with lightingsoft cloud profile builder, half success:)
Need help.
Transfer to W1 ok via wtools (great possibility)

The blackout not works, however if I push the encoder the the blackout works...
The full white (push blinder ) not works. (wheel not go to white

I do something wrong...but idea what I miss:(

Strobe: OK, Color wheel OK, dimmer OK, special channels OK.
It is stored under my cloud as only one fixture (LED Moving Head 60W)

PLease check.
The channel list are here:

11 channel mode
CH Features Explanation
1 PAN 0-255
2 PAN fine 0-255
3 Tilt 0-255
4 Tilt fine 0-255
5 Colour 0-9 White Color wheel
10-19 HellBlue
20-29 Magenta
30-39 Orange
40-49 Green
50-59 Blue
60-69 Yellow
70-79 Red
80-89 Red/Yellow
90-99 Yellow/Blue
100-109 Blue/Green
110-119 Green/Orange
120-129 Orange/Magenta
130-139 Magenta/Hellblue
140-255 Color change, spped each 10 higher
6 Gobo Channel 0-7 Open 0-63 Fix pattern
8-15 Gobo 1
16-23 Gobo 2
24-31 Gobo 3
32-38 Gobo 4
40-47 Gobo 5
48-55 Gobo 6
56-63 Gobo 7
64-71 Shake Gobo 0 open 64-127 Pattern shake
72-79 Shake gobo 1 72 slow-79 fast
80-87 shake gobo 3
88-95 shake gobo 4
96-103 shake gobo 5
104-111 shek gobo 6
112-119 shake gobo 7
120-127 shake gobo 7
128-255 wrap Gobo from slow to fast each 10 chenge the speed
7 Strobe 0-255
8 Dimming 0-255
9 PAn/Tilt speed 0-255
10 Automatic mode 0--59 role of other channels
60-84 Auto mode 3
85-109 Auto mode 2
110-134 auto mode 1
135-159 Auto mode 0
160-184 Sound mode 3
185-209 Sound mode 2
210-234 Sound mode 1
235-255 Sound mode 0
11 Reset 250-255

Thank you

[Simon]

Hi There

For non-branded fixtures, I'd recommend using the built-in fixture builder. It's easier to use than the online one.

Further info here on creating your own profile:
https://www.wolfmix.com/support-content ... re_profile

We also can also make it for you but we often charge for creating non-branded profiles because nobody else can make use of them. Fixture request page here:
https://store.wolfmix.com/ssl

[battihu]

Hi Simon!
Thanks, already done...tried with online...less success, built in works fine
Need learning course but then is very simple.
Sure complicated fixture are not easy...

Thanks