Page 1 of 1
Setting lights to different brightness levels for auto Generated Shows
Posted: Tue Jun 17, 2025 2:57 pm
by VSMDJS
I'm new to the Wolfmix having just purchased it a few weeks ago. I use 4 different sets of lights in my show; moving heads, wash lights, LED sticks and par up lights. My issue is that when I auto generate my preset shows, all the lights for every show is preset at 100% brightness. This is ok for 3 of my 4 lights except my wash FX2's lights are literally blinding at 100% and I have to manually turn them down to 25% brightness every time I change shows. Which is quite annoying. Is there a way I can program them to stay at 25% brightness for all auto preset shows and keep the others at 100%?
Re: Setting lights to different brightness levels for auto Generated Shows
Posted: Tue Jun 17, 2025 3:33 pm
by Kevin88
There is a setting in the global settings that says save dimmer value in preset. Turn this to no. And your set value of 25 will be like that for all your presets.
Re: Setting lights to different brightness levels for auto Generated Shows
Posted: Wed Jun 18, 2025 9:55 am
by mysteryboy28
Adjust the preset how you'd like (brightness, colors, effects, etc.), then shift/tap the preset (so it's blinking), then tap again to save. Or, like the previous guy said, un-tick the box he mentioned, and fader value won't change between presets. I prefer to do it manually for each preset, so they don't all look the same.
Re: Setting lights to different brightness levels for auto Generated Shows
Posted: Wed Jun 18, 2025 11:34 am
by Kevin88
Also a good option! Mine is beter for working the lights in a busking way your methode is beter for running the lights auto from preset to preset

Re: Setting lights to different brightness levels for auto Generated Shows
Posted: Wed Jun 18, 2025 1:27 pm
by VSMDJS
Thanks Everyone. I'll try out your suggestions.