ADJ Entour Venue - Smoke machine, several profile issues
Posted: Thu Jun 05, 2025 5:08 pm
Hi,
The ADJ Entour Venue will not respond to the Smoke buttons knobs at all when you set it up in 2 channel mode on the Wolfmix, setting it as either 1 or 4 channels will allow the Intensity settings to turn up the smoke amount along with setting the fans at a faster speed up to 30% but you cannot change the fan speed independantly from the Wolfmix on either settings (dmx 1 is Smoke Volume, 2 is Fan Speed, 3 is Duration for timer and 4 is the Interval - all 4 work when editing the dmx values so it's not an issue from the actual dmx side).
Running the 2.0.4 firmware but this was similar before 2.0 also.
The ADJ Entour Venue will not respond to the Smoke buttons knobs at all when you set it up in 2 channel mode on the Wolfmix, setting it as either 1 or 4 channels will allow the Intensity settings to turn up the smoke amount along with setting the fans at a faster speed up to 30% but you cannot change the fan speed independantly from the Wolfmix on either settings (dmx 1 is Smoke Volume, 2 is Fan Speed, 3 is Duration for timer and 4 is the Interval - all 4 work when editing the dmx values so it's not an issue from the actual dmx side).
Running the 2.0.4 firmware but this was similar before 2.0 also.