Page 1 of 1

Possible for WLINK dmx in to trigger action buttons?

Posted: Tue Jun 03, 2025 12:40 pm
by moka
Is it possible to use a foot pedal as a dmx-in "controller" to trigger action buttons like blackout, blind, flash, smoke?

if yes, can you guys recommend any foot controllers, or are there "button" only controllers? So basically I want to trigger the action buttons from a different place than only directly from the wolfmix 8-)



thanks!

Re: Possible for WLINK dmx in to trigger action buttons?

Posted: Wed Jun 04, 2025 7:39 am
by 86bibo
With the new FW2.0 update (still in Beta Phase!!!), you can asign Midi and DMX Inputs to the Flash buttons on the right side. If this is a foot pedal or a midi board with buttons basicly doesn't matter. Midi I haven't tested yet and as DJ, I'm also not that familiar with the varity of Midi devices. For DMX it works pretty solid and if you have a device where you can define a DMX channel and value, which is send, when the pedal is triggered, it will work. Most probably it will be hard to find a DMX foot pedal, so you might have to wait for the more experienced Midi colleagues here. But in general this is possible.