Colour problem fw2

[Kevin88]

Just found that the E till H pages aren’t able to switch colors on the color page. You can’t change for example orange to red I mean the spot where the color is. When you prefer a different way of seeing what colour is where

[willm]

Hi Kevin,

Thanks for the report- this one is already in our log and should be fixed by the devs shortly!

[Kevin88]

Great Will!

I mention a different thing i ran into on the previous page also. Not sure if you found it.

[willm]

Hey Kevin, are you referring to the Encoder issue? If so- I had already posted a reply, but I'll copy/paste my response below for you:

I'm not able to reproduce this actually on my side. If you hold Shift + press in the encoder- is the Lock symbol highlighted here? Perhaps a video demonstrating this would also be helpful if possible

Thanks!

[Kevin88]

Ah sorry probably missed it myself then!

All good! Just trying to help when I find stuff

[Kevin88]

Hi Will back on the problem that I mentioned earlier the black out works different on my movingheads in fw2.0. Before they just went out dimmer 0 but now they go to white and not off like before. The profile haven’t changed only the fw on my unit.

Profile: 60W movinghead Pri

Other point I’m playing around to see how Incan work out a good busking system with the new overlay presets but I feel that it’s a bit off that when you setup a beam fx it also changes the gobo. I see it’s in a “beam” but when making a few beam fx’s for busking its nice to only change the beam fx engine with a button to change from a slow part to a more busy part by setting up a few beams of movements. Would be great to turn of the involvement of the gobo change if you ask me.

I came to the idea to make for example 40 presets like the colours divided over the groups and make beam and move fx presets to use these to involve the chosen “setting” you see what I mean? But in a setting could be a preferred gobo or change it while you go but I don’t want it to change when I only wanne change the movement with one of the move presets.

For my idea it should only store the selected beam, colour or move fx not the other stuff. Ideally that should be remembered from the base preset your working in if that makes sence. Maybe this could be with an option when saving the preset to make it a base preset or a overlay preset kind of thing?

[Kevin88]

Hi Team,

Before you saw in the FX screens what page your on A-D or E-H. Since the new (better looking) layout this isn’t the case anymore. Is this something that could come back? When your in the fx and your using all the groups it’s nice to know where you are.

[86bibo]

Hi Team,

Before you saw in the FX screens what page your on A-D or E-H. Since the new (better looking) layout this isn’t the case anymore. Is this something that could come back? When your in the fx and your using all the groups it’s nice to know where you are.

Fully agree. I've you want to adapt something live, this is really an issue, that you don't see if you apply it to right group. It would be great if the names would appear but at least somewhere should be visible if you are on page A-D or E-H

[Sayhello]

Hello, i have installed V2.04

If i install the movinghead IMG Twist 30 or 60 (fixture from Wolfmix) all the colors are right
After installing my other movingheads Beamz Fuze 60B or S the colors are changed on the IMG movingheads, but the Beamz are oke.
Also colorbutton red is green or orange etc....
I tried to set them in different groups, but same problem.
If i install first the Beamz and after them the IMG i have the same problem

Also it seem like a color wheel problem
My ADJ 12H pixelbars and Showtec Pixelbar 12 did not change the colors