Wolfmix

Thanks for your response, WIll!

The Freedom Sticks do now look slightly better, but I must say - in the demo that Simon gave of the new 2.0 update, whatever he used for those pixel sticks looked A LOT more realistic than these Freedom Sticks. The freedom sticks do not have any beams and appear more like a pixel stick, if that makes sense. I can't actually see what the bars are doing because of the beams of light, that I don't think should really be there.

I understand the Stinger would a lot harder to duplicate in EasyView. I''ve tried with the new files but I'm unable to patch it and get control.. I'll keep working on that.

The Rockville LED Panel is "Stage Panel 864"

I really appreciate the help!

Hello,

The LED Bars used in our demo project were actually all tweaked slightly within EasyView to make this much more realistic. If you right click on the fixture, then go to 'Profile settings...', you can then reduce the 'Power (Lux)' setting to dial in that beam intensity. In the demo project we use at shows, the LED Bar is a slightly different fixture file but is should work mostly the same as this, and we use a 'Power (Lux)' setting of 100, and a 'Beam angle' of 11 degrees. Perhaps trying something like this will help?

I've also attached an edited version of the Stage Panel 864, which should hopefully help out a bit too!

wow thank you so much! I'll report back with my findings. Appreciate this!!