Wolfmix

I found that my movingheads didn’t knew the colours anymore probably need to set the gobo & colour wheel values again?

Only had a Quick Look to it but it really looks very very good! Good job team!

I see there is already a new firmware version released v2.0.2 so I will update and start again with trying and learning again
Thanks all for being so fast. Next coffee is on me for the Wolfteam

Heck we'll be up to Wolfmix 3.0 by the time I get home to try everything! Happy to see things moving and getting fixed so quickly!

Just updated to the new firmware and it's amazing, but I got too excited and forgot to backup my project lol. So remaking it from scratch.

On my slow song preset, I have my LED bars doing a slow soft effect. Whether it is sparkle, or chase, this new behavior happens:

When using the BPM speeds lower than 1 (it's most apparent with 4 and 8) the effect now "resets" after a full measure of the set BPM. Not allowing the effect to finish at the speed it's going at. Before, the effect was on a clean loop and would finish completely when set to slow bpm speeds. Now the slow effects reset after a measure, resulting in a jumpy resetting loop that keeps interrupting itself. This happens no matter what Link setting is enabled.

(This also happens on all fixtures with all slow FX, not just the LED bars)

Here's a video showing what I mean:

https://www.youtube.com/watch?v=DB9ivimCYDs

Here to say THANK YOU to the Wolfmix team for a great update full of useful features.

And thanks for the above average customer service in all aspects. I recommend the wolfmix and convince people to buy all the time. I am proud to refer them to this great product.

Agreed. This update is huge. Endless thanks to the team for working hard on it and listening to feedback.

I really appreciate the upgraded MIDI mapping abilities such as:

- being able to trigger Wolf/Strobe/Blinder etc
- being able to navigate presets (previous preset, next preset)
- having the option to NOT have presets force group channel intensities (this mimics the functionality of having a DMX fader input with "force" enabled so that it overrides the group channel intensities

Being able to have 200 presets is WILD. When I program a set, a single song may take up an entire page of presets (a separate preset for each part of the song). Now instead of 5 songs I can do 10 "pre-programmed" songs. And if I need even more, I can load a different project file MUCH faster than I could before.

I'm having issues connecting my APC mini midi. Seems to freeze and then lag like crazy when I plug it in.

I have a problem with colors. On the color wheel in the fixture I have e.g. red and the value assigned to it. On the buttons the color red is a different color e.g. blue. Although I have it right in the fixture

Hello all-

Thanks for all your quick and useful feedback! In order for us to keep a better track of your reports, it will be much more useful if you could raise any new discussion points in a separate thread. I will respond to the points that have already been mentioned here, then close off this thread- if further discussion is needed, please feel free to open a new thread and we'll pick it back up there.

royor wrote: ↑Thu May 08, 2025 4:42 pm ...
Also new behaviour: I had project called "Project A" loaded in the Wolfmix. Choose in the WTOOLS to restore another project called "project B" and that project B is immediately loaded and set as active project?
...

I have actually been informed that this ONLY occurs when converting an old project file to the new firmware. It needs to open the project for the conversion to be successful. If the project is built with 2.x- then the new project should not open automatically.

Wolfman_Malone wrote: ↑Thu May 08, 2025 5:22 pm Just updated to the new firmware and it's amazing, but I got too excited and forgot to backup my project lol. So remaking it from scratch.

On my slow song preset, I have my LED bars doing a slow soft effect. Whether it is sparkle, or chase, this new behavior happens:
...
Here's a video showing what I mean:

https://www.youtube.com/watch?v=DB9ivimCYDs

Thanks for the report! I've reported the issue to the devs to look into.

swangletang wrote: ↑Thu May 08, 2025 7:46 pm I'm having issues connecting my APC mini midi. Seems to freeze and then lag like crazy when I plug it in.

I'm unable to reproduce this one at the moment- would you please be able to open a new thread with some more details? Specifically:
- Is this using an old project, or a new one?
- If using an old project, were the MIDI mappings already set?
- Does the behaviour persist with a new project?
- If you reset the controller, then try again- does the problem persist?
- Can you send over a video demonstrating the behaviour?

koscianowskijacek wrote: ↑Thu May 08, 2025 7:49 pm I have a problem with colors. On the color wheel in the fixture I have e.g. red and the value assigned to it. On the buttons the color red is a different color e.g. blue. Although I have it right in the fixture

I'm not able to reproduce this issue either- would you please be able to raise a new thread with this information, plus the following:

- An image demonstrating the behaviour
- What fixture you are using?
- Is this an old project file, or a new one from v 2.x?
- If you start a new project does the same behaviour occur?


____________________

Thanks again everyone, your help in testing and reporting is greatly appreciated!

Kind regards,
Will