Bonsoir à tous,
Merci pour ce forum je suis un nouveau utilisateur et je découvre le wolfmix.
Je recherche une fixture 37ch fonctionnelle pour le zanzi bar fx3, j’ai essayé de la faire seule mais c’est beaucoup plus compliqué qu’une simple lyre.
Merci par avance!
Bonne soirée.
Power lighting ZANZI-BAR FX3
Re: Power lighting ZANZI-BAR FX3
Bonjour, est ce que quelqu’un a déjà réussi avec ce genre de produit 4-1, et si oui pourrait il m’aider svp?
Re: Power lighting ZANZI-BAR FX3
here is a working profile for Zanzibar FX3
This profile is 37Channel Mode only! Make sure your Zanzibar FX3 is set to 37Channel Mode as well
1. step: upload the .ssl2 file into the Nicolaudie Cloud (cloud.nicolaudiegroup.com)
2. step: open WTOOLS, select FIXTURES, open Cloud folder and select "blue arrow" to transfer into Wolfmix
3. step: when loading "Zanzibar FX3 37ch" into project, it will ask to split: YES - you see 5 Fixture entries (1. start address 2,3,4,5 "linked) - 1, 2, 3, 4 are Moving Heads, 5 is Laser. Select #5 and change to another Group. Exit (press HOME)
4. Operation: Main Group has all 4 Moving Heads, Pan/Tilt/Colors/Strobe. The "Laser" Group can be controlled by Colors AMBER + UV (for technical reasons cannot be Red + Green only).
Voilá
This profile is 37Channel Mode only! Make sure your Zanzibar FX3 is set to 37Channel Mode as well
1. step: upload the .ssl2 file into the Nicolaudie Cloud (cloud.nicolaudiegroup.com)
2. step: open WTOOLS, select FIXTURES, open Cloud folder and select "blue arrow" to transfer into Wolfmix
3. step: when loading "Zanzibar FX3 37ch" into project, it will ask to split: YES - you see 5 Fixture entries (1. start address 2,3,4,5 "linked) - 1, 2, 3, 4 are Moving Heads, 5 is Laser. Select #5 and change to another Group. Exit (press HOME)
4. Operation: Main Group has all 4 Moving Heads, Pan/Tilt/Colors/Strobe. The "Laser" Group can be controlled by Colors AMBER + UV (for technical reasons cannot be Red + Green only).
Voilá
- Attachments
-
- Zanzibar FX3 37ch.ssl2
- (41.99 KiB) Downloaded 51 times