Fixtures laufen nicht korrekt

Fixture not working as it should? Post it here and we'll check it out. Be precise with the fixture name as there are many with similar names.
Cougar
Posts: 5
Joined: Thu Mar 04, 2021 9:08 pm

Fixtures laufen nicht korrekt

Post by Cougar »

Hallo,

Ich habe folgende Probleme. Die nachfolgenden Fixtures laufen bei Lightrider & Daslight ganz normal. Beim Wolfmix reagieren die Geräte fehlerhaft bzw. Überhaupt nicht

Expolite Tour Spot 150 (Modus 3)
Expolite Tour Wash 76 Compact (hier speziell Modus/Person 2)
Showtec Spectral M850 (15 Kanal)
Martin Rush 1 WW Blinder (Modus 3)

Hoffe auf Eure Hilfe

Danke
Beatsystem
Posts: 21
Joined: Thu Mar 04, 2021 8:50 pm

Re: Fixtures laufen nicht korrekt

Post by Beatsystem »

Ich habe mittlerweile herausgefunden, dass wenn z.B. ein Wert nicht grade steht, die Funktion nicht einwandfrei ist.

Beispiel:
GLP Impression X4s
- Auswahl 18 Kanal Modus / Normal Modus am Gerät
Hier musste ich unter LIVE EDIT den Wert von der Mischfarbe im Kanal 5 auf 0 setzen, erst dann konnte ich eine andere Farbe über die Color Auswahl auswählen.

Die ist nur ein Tipp zur Unterstützung und noch nicht die Lösung des gesamten Problems. :!:
Cougar
Posts: 5
Joined: Thu Mar 04, 2021 9:08 pm

Re: Fixtures laufen nicht korrekt

Post by Cougar »

Hallo Beatsystem,

Beispiel :

Expolite Tour Wash 76 Compact

=> Auswahl Mode 2 (21 Kanal) im Controller & gleiche Einstellung am Gerät.

Dennoch funktionierte es bei Lightrider normal & im Wolfmix nicht. Das ist irgendwie merkwürdig ?!?!?
RyanMirror
Posts: 5
Joined: Thu Mar 11, 2021 9:47 pm
Location: Germany

Re: Fixtures laufen nicht korrekt

Post by RyanMirror »

Hallo Betasystem,

wenn ich im LiveEdit Änderungen vornehme, sehe ich diese nicht live. Ist das bei dir auch so?
Erst wenn diese gespeichert und aufgerufen werden, sieht man was geändert wurde.

VG
Ryan
TESTING WITH WM: VARYTEC HERO SPOT90 | VARYTEC WASH340FX | ADJ UB6H | CHAUVET FREEDOM STICKS
Simon
Posts: 528
Joined: Thu Mar 04, 2021 7:54 pm

Re: Fixtures laufen nicht korrekt

Post by Simon »

I believe all these profiles have now bean corrected. Let me know if not

Regarding the live edit, you need to switch it on before editing (this post belongs in the other forum, so please start a new post if you want to discus further)
RyanMirror
Posts: 5
Joined: Thu Mar 11, 2021 9:47 pm
Location: Germany

Re: Fixtures laufen nicht korrekt

Post by RyanMirror »

Thank you Simon...good to know.
TESTING WITH WM: VARYTEC HERO SPOT90 | VARYTEC WASH340FX | ADJ UB6H | CHAUVET FREEDOM STICKS
Post Reply