How configure RGBW inground in different zone...

[laurentWL47]

Hi all,
We have a customer ask us to install 52 pc inground light RGBW in à Park of castel, but customer ask us to have 4 zones in Park, A,B,C,D but he want we create different preset with wolfmix.
When we want made à preset we can't find the way to control color and dimming or other for each light in à group A for example, ive 8 lights all RGBW but in preset mode all stay in same color, i can made à preset with different color but only if i use different zone ABCD...
My question it : how can i program some preset with different color in one zone like A ?
Currently each time all RGBW in a zone keep all same color when we change it without, à way to separate each lamp color in one zone in preset
Thanks for you help.
Laurent

[axell]

1. You have (and want) to have certain fixtures in different GROUPS (A;B;C;D....H), so you can put different Colors on
2. You even can apply 2 or more Colors on ONE GROUP of fixtures: In STATIC COLOR (NOT! ColorFX!!) - dial the Group rotary encoder from SINGLE to "ALTERNATE" (dot on/off/on/off icon) - NOW you can select multiple Colors which are evenly distributed on all your fixture just for THAT GROUP only.

If you are looking for MULTIPLE EFFECTS....Sorry...Wolfmix is a SINGLE EFFECT DMX Controller, giving you ONE Effect for each function (ColorFX, MoveFX, Beam/DimmerFX). You can NOT use Group A doing one Color effect and using Group B to do anotherColor effect - as you have no other (2nd) Color effect!
But you can do ONE GROUP (A) on ColorFX, and do ANOTHER GROUP (B) apply STATIC Colors and apply BeamFX then to this GROUP (B), to get "different dynamics" then.

I would recommend to put ALL your 4 GROUPS into BeamFX. Each Group can have a different Color setting (Static Color!) and THEN you can put dynamics on it using BeamFX, adding On/Off single, multiple, or all Group to BeamFX then (having different Color settings in the 4 sections)

[laurentWL47]

Hi Axell,
Thanks for your answer, understand well my trouble, i try that this week and come back to you.
Laurent

[laurentWL47]

Hi Axell,
Customer want on this project to have specific color on different point, but currently we xan just use on on 2 obe on 3 one on4 et by on/off/on/off buttons, but we cant have the righ color in right point..
Not possible to change color with DMX address of lamp ?
Thanks for your help
Laurent

[axell]

no. Wolfmix is operating by Groups, NOT individual fixtures.

If you keep all the uplights on 1 (one!) Group only, then you only have single colors per Group or "alternate" Colors (distributed as a fixed distribution rule over the number of fixtures in this Group).
If you use the "Alternate Mode (distribute various Colors to the fixtures in the Group) and your customer wants to have certain Colors on certain lights, you can also change the order of the POSITION of the lights in the Fixture Setup and "MOVE" them up or down to get the right Color to the right fixture, to "change" the color of the fixture by reorder it.

Ultimately you also can assign your uplights to "multiple" Groups, then EACH Group can provide the requested Color for the assigned uplight without interfering by the "distribution rule in alternate mode.