I have just added a DMX fader unit to give me more dimming control on my W1 but this has reduced the outputsockets by 1 as Channel C in now connected to the DMX mixer.
I really need to have 4 output cannels, does anyone know if i can use an adapter or splitter bead to give me back socket C to control some lighting fixtures allocated to that channel as now the WLink cable is plugged in I have lost that output socket for the lights and still use the WLink feature.??
Dave...
WLink
Re: WLink
Hi Dave,
Unfortunately this is not possible because the WLINK data is different than DMX data and therefore they can't be sent simultaneously (so a splitter will not work in this way). I'm afraid the only solution to this - if you wanted to use all outputs and faders simultaneously, is to use a W1 MK2 with a MIDI controller.
Kind regards
Unfortunately this is not possible because the WLINK data is different than DMX data and therefore they can't be sent simultaneously (so a splitter will not work in this way). I'm afraid the only solution to this - if you wanted to use all outputs and faders simultaneously, is to use a W1 MK2 with a MIDI controller.
Kind regards
Alex
Wolfmix Support
Wolfmix Support