Eurolite PARty TCL Spot

Fixture not working as it should? Post it here and we'll check it out. Be precise with the fixture name as there are many with similar names.
janbuerger
Posts: 1
Joined: Fri May 10, 2024 6:24 pm

Eurolite PARty TCL Spot

Post by janbuerger »

The "Eurolite PARty TCL Spot" has as a default value of 006 in channel 5.
That sets the fixture in Sound-to-Light mode.

The default value of channel 5 needs to be 000

https://www.steinigke.de/download/42110 ... -de_en.pdf

Channel 1
000 – 255 Brightness red (0 – 100%)

Channel 2
000 – 255 Brightness green (0 – 100%)

Channel 3
000 – 255 Brightness blue (0 – 100%)

Channel 4
000 – 255 Total Brightness (0 – 100%)

Channel 5
000 – 000 No function
001 – 010 Sound control
011 – 255 Strobe with increasing speed
axell
Posts: 368
Joined: Sat Feb 12, 2022 8:52 am

Re: Eurolite PARty TCL Spot

Post by axell »

This probably has been fixed in a newer version of the profile available from the Online Library.
Delete the PARty TCL Spot profile from the Wolfmix, open WTOOLS on the computer and "sync" the new version to your Wolfmix.
Channel 5 (Strobe) now has a default of 000 (being Off)

You can also correct these changes yourself by using the Profile Builder (cloud.nicolaudiegroup.com)
Post Reply