Hi everyone,
I have 6 fixtures, 4 in group A and 2 in Group B.
I'd like group A to use different Color and Beam FX than Group B.
Is there some hidden Shift command I miss or are colors and beam FX always the same across all groups?
Selection per Fixture group
Re: Selection per Fixture group
Wolfmix is a "single effect DMX controller" per function. Functions are: (1) Colors, (2) Movements and (3) Light intensity/beam. Each of the functions provide ONE (1) effect. This effect can be applied to either all Groups or just selected Groups. Example: If some of your Lightings assigned to Group A running a ColoFX effect, there is no other(!) ColorFX effect possible for other Lighting in Group B. Group B only can either "join" the same effect or "not join".
You can do some "workarounds" - like putting ONE ColorFX effect to Group A only and assign Group B to STATIC COLORS, to select a few Colors. Now go to BeamFX and activate another "beam" effect on Group B with the preselected Colors - voilá you have another effect on Group B
You can do some "workarounds" - like putting ONE ColorFX effect to Group A only and assign Group B to STATIC COLORS, to select a few Colors. Now go to BeamFX and activate another "beam" effect on Group B with the preselected Colors - voilá you have another effect on Group B