Wlink DMX withe jw-40

[DjSam54]

Hi Axel I can use this DMX table with the Wlink?

[SimonS]

Yes you can. You can use Fader 1-8 for dimming Groups A - H and Fader 9 (Page 2 Ch1) for dimming master. Use for that manual mode

See this video: https://www.youtube.com/watch?v=Q6aZ5yG3EMw

[axell]

You can use up to all 40 channels to control channels in you project with. Just make sure you "send" the correct fader on the correct channel by selecting the 5 buttons on the left (1=ch1-ch8; 2=ch9-ch16; 3=ch17-ch24 and so on).
You can also rearrange the receiving channels for dimmer or other channels and put on channels as you like, i.e putting Group Dimmer on Fadergroup 5 with channels ch33-ch40. You are free to assign to any channel between 001 to 255 (having a desk with 255 faders)

[DjSam54]

thank you Axell and Simons for the answer.