Hello Wolfmix Team,
I think since the last updates (don't know exactly, maybe 1.1.2 worked for me) the preset jumps don't work anymore with my Stairville DMX-Foot2.
I've tried all possible settings, but the presets switch always to anywhere. Once two forward and two back, another time one row down and so on.
I had a few gigs in the summer and all worked fine (firmware 1.1.2).
Thank you!
Problem with WLINK - Preset Jump DMX IN
Problem with WLINK - Preset Jump DMX IN
Last edited by MisterDoc on Fri Oct 27, 2023 8:27 am, edited 2 times in total.
Re: Bug in Preset Jump DMX IN? (WLINK)
There seem to be an issue in one of the newer firmware releases with WLINK activities, (sort of) confirmed by support
viewtopic.php?p=2389#p2389
viewtopic.php?p=2389#p2389
Re: Bug in Preset Jump DMX IN? (WLINK)
WLINK bug not fixed yet?
Re: Problem with WLINK - Preset Jump DMX IN
Please Wolfmix Team,
I need to fix this.
Beta 0.75 and beta 1.0 works great with the preset jump, but I can't open my latest projects saved in version 1.7.
I have to play three times this week, but the WLINK is useless for me
Regards
Helmut
I need to fix this.
Beta 0.75 and beta 1.0 works great with the preset jump, but I can't open my latest projects saved in version 1.7.
I have to play three times this week, but the WLINK is useless for me
Regards
Helmut
Re: Problem with WLINK - Preset Jump DMX IN
This should be fixed in V1.1.8. Please let me know if there are still issues with this version. Sorry it took a while, it was only reproducable with certain controllers and was quite a tricky one to solve.
Re: Problem with WLINK - Preset Jump DMX IN
Sorry Simon, but this didn't fix the problrm. It's just like befor. Not working
Re: Problem with WLINK - Preset Jump DMX IN
MisterDoc, is maybe your DMX Jump setting still active assigned for one channel, so it jumps "around" ? The "flickering" and the reassigning of the Main DMX IN channel has been fixed. I can now normally control the Group Dimmers with my external DMX fader desk.
Re: Problem with WLINK - Preset Jump DMX IN
Axell, my DMX jump is active, cause I need preset jump with my footswitch, but the update didn't fix that.
It's all like before.
It's all like before.
Re: Problem with WLINK - Preset Jump DMX IN
Try on a fresh project and then add WLINK first and then your DMX Jump and see if it is the Project which may cause the issue ...
Re: Problem with WLINK - Preset Jump DMX IN
The answer from Wolfmix Team (Will Maskell) which fixed my problem at the right time:
The issue here was that even though the 'Preset DMX IN channel' parameter was set to ' - ', there was a hidden value set- so the 'Preset DMX IN channel' setting and the 'Preset Jump DMX IN channel' setting were clashing with each other and causing some strange behaviour. This was resolved by scrolling the value for 'Preset DMX IN channel' to the right, then resetting the value to ' - '.
The issue here was that even though the 'Preset DMX IN channel' parameter was set to ' - ', there was a hidden value set- so the 'Preset DMX IN channel' setting and the 'Preset Jump DMX IN channel' setting were clashing with each other and causing some strange behaviour. This was resolved by scrolling the value for 'Preset DMX IN channel' to the right, then resetting the value to ' - '.