Hello,
I can find the fixture, but when I load it I can only control the UV lamp, not the other features in the lamp.
I have tried to both run with and without splitting.
It’s this machine: https://www.thomann.de/gb/stairville_all_fx_bar.htm
Manual: https://images.static-thomann.de/pics/a ... online.pdf
I am using it in 10 channel mode.
Any recommendations?
Thanks
Steffen
Issue with Stairville All FX Bar
Re: Issue with Stairville All FX Bar
I recommend to edit the (standard) PROFILE and make Wolfmix "aware" that it should control "Beam LEDs" (but PROGRAMS and not Colors) and also a Laser with Rotation etc.
This can be accomplished when configure DMX Styles Wolfmix UNDERSTANDS (like Colors, Gobos, Rotations etc) and replace them with the existing "OTHER(?)" undefined channels in the Profile, Wolfmix is ignoring for a good reason.
In other words: Optimize the profile to work by including (for Wolfmix Automation) DMX Types, so you can control your ALL FX BAR thru the Wolfmix User Interface.
With the correct 10Ch profile (left) and "beam" assignment to "split" to various Groups for control (right) , your profile could then look like:
This can be accomplished when configure DMX Styles Wolfmix UNDERSTANDS (like Colors, Gobos, Rotations etc) and replace them with the existing "OTHER(?)" undefined channels in the Profile, Wolfmix is ignoring for a good reason.
In other words: Optimize the profile to work by including (for Wolfmix Automation) DMX Types, so you can control your ALL FX BAR thru the Wolfmix User Interface.
With the correct 10Ch profile (left) and "beam" assignment to "split" to various Groups for control (right) , your profile could then look like:
- Attachments
-
- allfxbar.jpg (256.66 KiB) Viewed 10193 times
Re: Issue with Stairville All FX Bar
Ah great - thanks!
I’m new into the Wolfmix world. Can I download the programming you are showing in Profile builder?
Thx
Steffen
I’m new into the Wolfmix world. Can I download the programming you are showing in Profile builder?
Thx
Steffen
Re: Issue with Stairville All FX Bar
The Profile Builder I am using is the Web (Cloud) version, which can be found on
https://cloud.nicolaudiegroup.com/#/dashboard (select the "red bulb" Profile Builder)
Then create the Channels and Presets using the Template first and then configure the "profile" in the Mode, using/adding the Template channels to the profile then.
A good Profile Builder tutorial (not comprehensive!) can be seen found here: https://www.youtube.com/watch?v=4GAZ-M8_cfg
https://cloud.nicolaudiegroup.com/#/dashboard (select the "red bulb" Profile Builder)
Then create the Channels and Presets using the Template first and then configure the "profile" in the Mode, using/adding the Template channels to the profile then.
A good Profile Builder tutorial (not comprehensive!) can be seen found here: https://www.youtube.com/watch?v=4GAZ-M8_cfg
Re: Issue with Stairville All FX Bar
Great! Any chance you are willing to share the profile you made?
Re: Issue with Stairville All FX Bar
I provided all necessary information to build your own profile out of it.
If you want to have have the profile "ready-made" - then you have to contact me privately.
If you want to have have the profile "ready-made" - then you have to contact me privately.