ADJ UB 9H multi beam profile

Fixture not working as it should? Post it here and we'll check it out. Be precise with the fixture name as there are many with similar names.
Posts: 1
Joined: Fri Feb 24, 2023 10:15 pm

ADJ UB 9H multi beam profile

Post by SoulFab »

It appears that when the UB 9H fixture profile is selected, the multi-beam option does not appear! Please double check, I had to build a new profile from scratch. Where can I share?
Posts: 388
Joined: Sat Feb 12, 2022 8:52 am

Re: ADJ UB 9H multi beam profile

Post by axell »

This is a normal situation with older profiles. Wolfmix can be "picky" if the beam sequence (1,2,3,4,...) is not precise, so it does not "offer" the fixture to be "split". Then you have to rework the profile = normal procedure.
If we want this not to happen again, we need to update 95% of the 15.000 fixture in the library and rework all the profiles (until the next update comes and we have to start again).
Who wants to volunteer on this?
Post Reply