leesinthemix wrote: ↑Thu Jan 12, 2023 11:49 pm
I've found a solution for the time being for Traktor. However, as I don't own a mac I can't test it out.
This is an open source mac app, which takes a MIDI clock signal and converts it to Ableton Link
Anyone care to report back on this please?
I would be much happier if Wolfmix would accept MIDI as input for the BPM rate straight from my DJ laptop instead of going through some third party apps.
Why would you want to use MIDI clock? There is no PHASE INFORMATION. What would be the point of the light show, if Wolfmix can't know when the 1st beat of each bar is?
You would also need to use a USB to MIDI interface to make all of this happen, meaning more cables and more faff.
I've done it before with Traktor and Soundswitch. It's just not very intelligent.
leesinthemix wrote: ↑Thu Jan 12, 2023 11:49 pm
I've found a solution for the time being for Traktor. However, as I don't own a mac I can't test it out.
This is an open source mac app, which takes a MIDI clock signal and converts it to Ableton Link
Anyone care to report back on this please?
I would be much happier if Wolfmix would accept MIDI as input for the BPM rate straight from my DJ laptop instead of going through some third party apps.
Why would you want to use MIDI clock? There is no PHASE INFORMATION. What would be the point of the light show, if Wolfmix can't know when the 1st beat of each bar is?
You would also need to use a USB to MIDI interface to make all of this happen, meaning more cables and more faff.
I've done it before with Traktor and Soundswitch. It's just not very intelligent.
As long as Traktor does not offer an Ableton Link that follows the BPM of the Master track deck, there should be another solution.
Also the solution on GITHUb does not carry phase information, since it is based on MIDI as well, or?
Since I found the mic (at least on the W1 I had borrowed) not working reliably, I will need a cable connection anyway. So it could be either an audio connection (which does not have Phase connection by default and can also be tricky to interpret on the beat) or an USB-connection. MIDI is here the most reliable format, even though it has its limitations. Time tested so to speak.
If you're happy with your lightshow not being in Phase from time to time, then that's the trade off you'll have. Personally I would switch to Serato or ditch software all together.
However, until Wolfmix fix the bug I identified above, then both methods are going to give mixed results.
Ickehier wrote: ↑Mon Jan 30, 2023 2:06 pm
As long as Traktor does not offer an Ableton Link that follows the BPM of the Master track deck, there should be another solution.
Audiobus is an iOS app, which can take in MIDI Sync as MASTER and use Ableton Link as SLAVE. I tested this on the weekend using a WIDI Master bluetooth module and an old iPhone, but it was quite buggy. The Audiobus manual says not to use bluetooth for MIDI sync, due to the connection being very unreliable.
I've identified this as a good option, I think it was only released in the past couple of months. It has USB-C for newer iPhones/iPads.
I'll let you know how I get on once I've ordered it, but it definitely definitely works.
If you manage to have a go before me, then let me know here!
Hi,
I have a Solution for Rekordbox.
there is a software called Rekordbox OSC (https://github.com/grufkork/rkbx_osc)
This software is reading the master bpm and giving it out in abelton link.
It works in the comandline but im not sure if it works that well on mac.
How to:
download the executeble
navigate to the downloaded exe: in the comandpromt (cd C:\Users\[username]\Downloads\
Check for updates: try just running rkbx_osc.exe -u or Just place the newest offset file next to the executable if the other way dosnt work the other way there should already be a file there, just delete the old one.
Run Rekordbox
Then run rkbx_osc.exe or rkbx_osc.exe -v [Version number] example: rkbx_osc.exe -v 6.8
if that ydoes not work try .\rkbx_osc.exe -v [Version number]
You can also make an .bat file out of that if you dont want to open the command promt every time. Yust put this in notpad and save as rekordboxosc.bat (than you can youse it if it was an normal aplication (it automatically opens the command line and updates):
cd C:\Users\username\Downloads\ &::cd to your file lokation of the rkbx_osc.exe
rkbx_osc.exe -u
rkbx_osc.exe
Pause
if you have some problems post an issue on github
Best Regards Jones
Attachments
Screenshot 2024-04-29 090912.png (41.52 KiB) Viewed 669 times
Last edited by Jones on Mon Apr 29, 2024 7:38 am, edited 5 times in total.