Ape Labs has introduced a new 7 Channel DMX mode for all Products in the current Firmware 5.0 and replaced the previous 3 Channel Mode (Dimmer, Program, Speed).
7 Channel „R,G,B,W,Dim,Speed,Musik“ (replaces first mode Dim,Prog,Speed)
1 R (0..255)
2 G (0..255)
3 B (0..255)
4 W (0..255)
5 Dimmer (0..255)
6 Speed/Strobe (0..255) strobe time on=off= in seconds:
0: Off
1: 513850 = 142h = 5.9days
2: 64231 = 17.8h
3: 19031 = 5.3h
10: 513 = 8.55m
20: 64
37: 10.1
64: 2.0
80: 1.0
100: 0.514
200: 0.064
255: 0.031
7 MusikMode (0..255)
<=125 = OFF
>125 = ON (with lamp internal microphone)
Would it be possible to update this in the official profiles for ApeLight Maxi, LightCan, ApeStick 4, ApeCoin?
Ape Labs Firmware 5.0 New DMX Mode
Re: Ape Labs Firmware 5.0 New DMX Mode
Please request these update here:
https://store.wolfmix.com/ssl
We'll need official documentation from Ape Labs.
https://store.wolfmix.com/ssl
We'll need official documentation from Ape Labs.
Re: Ape Labs Firmware 5.0 New DMX Mode
This should only be a hint, since the fixtures also have the WWW marking.
Then I change the whole thing myself with the Fixture Builder.
Here is the official changelog from Ape Labs, the new firmware is available now.
https://apelabs.com/softwareupdatesoftw ... e-support/
Then I change the whole thing myself with the Fixture Builder.
Here is the official changelog from Ape Labs, the new firmware is available now.
https://apelabs.com/softwareupdatesoftw ... e-support/
Re: Ape Labs Firmware 5.0 New DMX Mode
Sorry I'm a bit 'late to the party' on this one
I have 15 apelab maxis configured in a single group (B) on my Wolfmix
Is there an easy way to activate 'MusikMode' for all these fixtures and save it as a preset please?
Thanks
DJ Gaz
I have 15 apelab maxis configured in a single group (B) on my Wolfmix
Is there an easy way to activate 'MusikMode' for all these fixtures and save it as a preset please?
Thanks
DJ Gaz