Hi Simon,
I am testing the new feature in the Wolfmix test file along with the 3D Easy View file. The function to apply the BEAM-FX to Iris&Zoom can be selected but shows no reaction. With Liveedits the values can be controlled. Also in the DMX window you see no changes in the Beam-FX Iris&Zoom.
I don't have any devices with zoom in stock at the moment, but I hope this feedback will help you.
Best regards from Germany
Matthias
Firmeware 0.6.2 BEAM FX Zoom&Iris don't work
-
[email protected]
- Posts: 52
- Joined: Thu Mar 04, 2021 9:09 pm
Firmeware 0.6.2 BEAM FX Zoom&Iris don't work
Matthias Steenblock
- Owner Dj MSB & Event Rental
- Projectmanager for entertainment systems for the cruise industry
Languages: German, English
Place of residence: Aurich, Lower Saxony, Germany
- Owner Dj MSB & Event Rental
- Projectmanager for entertainment systems for the cruise industry
Languages: German, English
Place of residence: Aurich, Lower Saxony, Germany
Re: Firmeware 0.6.2 BEAM FX Zoom&Iris don't work
Hi Matthias
The problem is that the factory project needs updating. If you perform a factory reset, it'll send the new project. Alternatively, we'll be including the new project with WTOOLS once the firmware has been made official.
The problem is that the factory project needs updating. If you perform a factory reset, it'll send the new project. Alternatively, we'll be including the new project with WTOOLS once the firmware has been made official.