When selecting MOVE FX Tilt Prog, I see the "position" buttons (4 for Center, 2 for Up, 2 for down, left, right ...etc). Can I somehow edit these positions? I noticed that when selecting UP, my Moving Heads do NOT reach the max Limit, previously set by Moving Head Limiting Area.
When using STATIC POSITION, I can edit the Tilt value up to 243, which is the max DMX value defined in my limiting area preference. But Tilt Prog (up-down) in Move FX only reaches max DMX value of 213. How can I also get to DMX value 243 (higher) here? (Yes, SIZE is set to 100% so it should be possible to reach max Tilt value)
Besides: at the 8-Ball Prog the Moving Heads go all the way to the max Tilt value of 243....
Move FX / Position Buttons - how to edit?
-
- Posts: 52
- Joined: Thu Mar 04, 2021 9:09 pm
Re: Move FX / Position Buttons - how to edit?
I would also like to have the possibility to fine-tune the positions.
Matthias Steenblock
- Owner Dj MSB & Event Rental
- Projectmanager for entertainment systems for the cruise industry
Languages: German, English
Place of residence: Aurich, Lower Saxony, Germany
- Owner Dj MSB & Event Rental
- Projectmanager for entertainment systems for the cruise industry
Languages: German, English
Place of residence: Aurich, Lower Saxony, Germany
Re: Move FX / Position Buttons - how to edit?
+1 for editing pos-buttons
-
- Posts: 161
- Joined: Thu Feb 24, 2022 12:13 am
Re: Move FX / Position Buttons - how to edit?
+1 a crucial feature that would be great to have please.
Re: Move FX / Position Buttons - how to edit?
I've got it on the todo list.
-
- Posts: 52
- Joined: Thu Mar 04, 2021 9:09 pm
Re: Move FX / Position Buttons - how to edit?
The best news I have seen today.
You will make many users even happier.
Matthias Steenblock
- Owner Dj MSB & Event Rental
- Projectmanager for entertainment systems for the cruise industry
Languages: German, English
Place of residence: Aurich, Lower Saxony, Germany
- Owner Dj MSB & Event Rental
- Projectmanager for entertainment systems for the cruise industry
Languages: German, English
Place of residence: Aurich, Lower Saxony, Germany
Re: Move FX / Position Buttons - how to edit?
+1 editable buttons would be greatfull
-
- Posts: 161
- Joined: Thu Feb 24, 2022 12:13 am
Re: Move FX / Position Buttons - how to edit?
Hey,
Having spent a lot more time with the W1 lately, I think what would be more beneficial is fixture limits for each position zone within the Move FX.
If we could dial in the min/max tilt/pan range for each position zone, it would allow for some really cool possibilities.
For example, an Up/Down effect for moving LED bars so they go no lower than just above the crowd's heads and no higher than just below a mirror ball mounted on the ceiling.
The size parameter simply works as normal and hits the min and max values when set to 100%, but no further.
Having spent a lot more time with the W1 lately, I think what would be more beneficial is fixture limits for each position zone within the Move FX.
If we could dial in the min/max tilt/pan range for each position zone, it would allow for some really cool possibilities.
For example, an Up/Down effect for moving LED bars so they go no lower than just above the crowd's heads and no higher than just below a mirror ball mounted on the ceiling.
The size parameter simply works as normal and hits the min and max values when set to 100%, but no further.