BPM SYNC Steps not on Beat

[[email protected]]

Hello dear Wolfmix Team,

I always notice that the BPM Sync in the FX Racks does not work as I imagine it and many other Dj's certainly do.

If I enter 120BPM via TAP and 1 beat I normally expect to have 120 steps per minute, but in Wolfmix it is 480 steps with 4 fixtures. I can still solve this if I set 4 beats. But if I now have 6 lamps I don't get the FX on the beat.

I have created a video where I have 4 or 6 fixtures running at 120bpm and once in the ColorFX once in the Beat FX.

Should it not be so that the FX Racks should make 1 step per beat if you have set it to 1, currently he always works the whole run of the FX within a beat. I think even if you have presets sometimes with 2 lamps sometimes with 6 or 8, depending on the group choice it should be so that you do not always have to adjust here. The speed of the steps should always be the same no matter how many devices are selected.

Here once the video and also the FX settings:

Group A: 1=RGB 3=RGB 4=RGB 6=RGB
Group B: 2=RGB 5=RGB

https://youtu.be/vZk5natCODU

https://ibb.co/34T8K6X
https://ibb.co/QNCQcXT
https://ibb.co/SNvVG2x
https://ibb.co/Fxwb3g3

[Simon]

Effects are divided up in BPM mode (1/2, 1/4, 1/8 etc...). The number of fixtures isn't taken into consideration. I'll have a think if this could be possible with future effects.