Issue with Stairville All FX Bar

Fixture not working as it should? Post it here and we'll check it out. Be precise with the fixture name as there are many with similar names.
Post Reply
DJSteffen
Posts: 3
Joined: Fri Nov 03, 2023 6:10 pm

Issue with Stairville All FX Bar

Post by DJSteffen » Thu Nov 09, 2023 7:36 pm

Hello,

I can find the fixture, but when I load it I can only control the UV lamp, not the other features in the lamp.
I have tried to both run with and without splitting.

It’s this machine: https://www.thomann.de/gb/stairville_all_fx_bar.htm

Manual: https://images.static-thomann.de/pics/a ... online.pdf

I am using it in 10 channel mode.

Any recommendations?

Thanks
Steffen

axell
Posts: 323
Joined: Sat Feb 12, 2022 8:52 am

Re: Issue with Stairville All FX Bar

Post by axell » Sat Nov 11, 2023 9:34 am

I recommend to edit the (standard) PROFILE and make Wolfmix "aware" that it should control "Beam LEDs" (but PROGRAMS and not Colors) and also a Laser with Rotation etc.
This can be accomplished when configure DMX Styles Wolfmix UNDERSTANDS (like Colors, Gobos, Rotations etc) and replace them with the existing "OTHER(?)" undefined channels in the Profile, Wolfmix is ignoring for a good reason.

In other words: Optimize the profile to work by including (for Wolfmix Automation) DMX Types, so you can control your ALL FX BAR thru the Wolfmix User Interface.

With the correct 10Ch profile (left) and "beam" assignment to "split" to various Groups for control (right) , your profile could then look like:
Attachments
allfxbar.jpg
allfxbar.jpg (256.66 KiB) Viewed 3655 times

DJSteffen
Posts: 3
Joined: Fri Nov 03, 2023 6:10 pm

Re: Issue with Stairville All FX Bar

Post by DJSteffen » Mon Nov 13, 2023 7:39 pm

Ah great - thanks!
I’m new into the Wolfmix world. Can I download the programming you are showing in Profile builder?

Thx
Steffen

axell
Posts: 323
Joined: Sat Feb 12, 2022 8:52 am

Re: Issue with Stairville All FX Bar

Post by axell » Tue Nov 14, 2023 2:59 pm

The Profile Builder I am using is the Web (Cloud) version, which can be found on
https://cloud.nicolaudiegroup.com/#/dashboard (select the "red bulb" Profile Builder)
Then create the Channels and Presets using the Template first and then configure the "profile" in the Mode, using/adding the Template channels to the profile then.

A good Profile Builder tutorial (not comprehensive!) can be seen found here: https://www.youtube.com/watch?v=4GAZ-M8_cfg

DJSteffen
Posts: 3
Joined: Fri Nov 03, 2023 6:10 pm

Re: Issue with Stairville All FX Bar

Post by DJSteffen » Fri Nov 17, 2023 8:22 pm

Great! Any chance you are willing to share the profile you made? :)

axell
Posts: 323
Joined: Sat Feb 12, 2022 8:52 am

Re: Issue with Stairville All FX Bar

Post by axell » Sun Nov 19, 2023 9:51 pm

I provided all necessary information to build your own profile out of it.
If you want to have have the profile "ready-made" - then you have to contact me privately.

Post Reply