Cameo Instant Hazer 1500 T Pro

Fixture not working as it should? Post it here and we'll check it out. Be precise with the fixture name as there are many with similar names.
Post Reply
fohlwilting
Posts: 2
Joined: Sat Jan 28, 2023 3:08 pm

Cameo Instant Hazer 1500 T Pro

Post by fohlwilting » Sat May 27, 2023 1:07 pm

Hey there,

the Cameo Instant Hazer 1500 T Pro has two channels: Smoke and Smoke Fan
https://www.cameolight.com/de/downloads ... 1096330246

So when a fixture profile has two channels, one where smoke off is at zero and smoke is set from 1 to 255 and the second channel the smoke fan is set to 0 means off and smoke fan from 1 to 255, shouldn't it be controlled via the smoke button? At the moment the fan works. I can press the smoke button and adjust the fan with the second encoder. But the first one doesn't change anything. What do I miss? Or is it the specific fixture preset?

Thanks and greetings
Lars

axell
Posts: 323
Joined: Sat Feb 12, 2022 8:52 am

Re: Cameo Instant Hazer 1500 T Pro

Post by axell » Wed May 31, 2023 2:47 pm

You only need a correct profile for best 2Ch operations.Both channels need to be configured as "SMOKE" channels, where one channel is SMOKE AMOUNT and the other channel s SMOKE FAN - see attached 2Ch profile for Instant Hazer 1500 T Pro.

You can pre-select the Fan Speed and the „Fog" amount when you press (SHIFT) + Smoke button simultaneous. The first 2 columns on the left gives you 5 ranges (1%, 25%, 50%, 75, 100%) for (Fog) Intensity and Fan Speed. The column on the right defines whether the SMOKE button acts like a flash button or on/off toggle. The other 3 buttons are timer presets with various hold times (1 sec; 5 sec; 10 sec). So when press the SMOKE button it uses the pre-defined settings
Attachments
Instant Hazer 1500 T Pro 2Ch.ssl2
(4.45 KiB) Downloaded 172 times

Post Reply