Fixture works but not in EasyView

Fixture not working as it should? Post it here and we'll check it out. Be precise with the fixture name as there are many with similar names.
Post Reply
TomDen
Posts: 1
Joined: Tue Nov 15, 2022 2:42 pm

Fixture works but not in EasyView

Post by TomDen »

First off, greetings all, I have just arived here - learning by the day but I have a question already!

I have a simple QTX COB PAR-180 (154.038UK) RGB. This fixture was not in the list but I found one (PAR-180.ssl2) and added it via the cloud. The fixture now works fine when controlled by the Wolfmix. I added my other lights and this one in EasyView by manually copying it in into the ScanLibrary.

My other lights work fine in EasyView, but not this one. Looking directly at the DMX values it all seems ok. Any suggestions what to try next please?
Tom
Top
Adrian
Posts: 16
Joined: Sat Aug 13, 2022 10:55 am

Re: Fixture works but not in EasyView

Post by Adrian »

I have the same problem with TMH-75 Hybrid. Head moves even in EasyView but no light.
Top
Post Reply

Return to “Fixtures Behaving Badly”