Wolfmix

The "Presets" are sort of hard-coded to the Groups. There is no dynamic link to the fixture itself. So if you delete your fixtures from the Group, the Preset will not be "notified" and still does its actions to the Group it was previously assigned to. So you have to redo your Pre...

In the Live Edit pages you have 2 visual options to figure out if a Live Edit still has some fragments assigned ( = not fully deleted). Option 1: if you have any low yellow (or low blue - if locked) dimmed button - then there is a Live Edit "with some content". Hold SHIFT button and select...

Es existieren 2 (mit mkII - 3) versionen vom 7Q Profil Ein "altes" was einen Fehler hat (ETEC LED Beam Moving Head 7Q) Ein" aktuelles" was funktionieren sollte (Moving Beam 7Q) und eben das mkII (ETEC LED Moving Head 7Q mkII) Lösch das "alte" Profil und lade das "a...

I am not allowed to upload files/videos larger 500kB. I am not able to create a video of that size. Try yourself and copy a Preset to another location! Select PRESET page Now hold (keep holding!) the SHIFT button Now while still holding SHIFT, select the Preset you want to copy FROM (source) (it sta...

Rollback can be accomplished to v 1.0.0 using (latest) WTOOLS v. 1.5.3
(forget the "BETA" tag, its irrelevant)

It can become a bit "complex" to remote control Wolfmix wireless. Wolfmix itself has NO communication protocols imbedded (beside MIDI), that is why we use WTOOLS as the "communication link" between a network (Cloud) and the device. WTOOLS also has no "remote control" AP...

When in PRESET page, while holding the SHIFT button, select the "from"-Preset, keep holding SHIFT and now select the "to"-Preset, finally confirm (push) the flashing Preset - done Make sure to empty the "previous" Preset slots, as they eventually can interfere with acti...

If it can't "reading the project from the controller" it could have 2 reasons: 1. try to RESET WTOOLS under "Settings" tab (something has "hang up"), or 2. insufficient power to the Wolfmix/WMX1. Even if the lights are "On" it eventually does not get enough po...

sure, if the fixtures are next to each other and you replace one now with a higher channel count, you "reach into" first channel of the next fixture/fogger. Delete both devices and reassign one by one using the correct channel modes and you are set. Another possibility could be a false Fog...

Wolfmix W1 mkII has a MIDI implementation, which can read MIDI Clock as well as trigger Presets by sending MIDI notes. The Preset itself then can be defined to be active by a predefined SYNC value (i.e. 16 bars or 32 bars, or ...) You have the DMX Effect speed via MIDI Clock, Preset trigger via MIDI...