Wolfmix

YES! Your answer was the "Holy Grail" / 1 Mio. $" question about "fixture splitting" I never figured out. Thanks for explanation!

you can put all Whites PARs in one Group and then disable all other Groups except the White PARs from the STROBE button (new feature in 0.6.x). When you run a Preset and press STROBE, only WHITE PARs will strobe as all others are "ignored". Function is called: ignore flash buttons when rec...

When I have a fixture (i.e. Hybrid Spot/Washer Moving Head) and I want to control the Spot and Wash colors and dimming independently from each other. It says the fixture has 2 Beams but when I patch I am NOT getting the "Split-Question". What is the "trigger" to get this message ...

Wow, and with MIDI clock over USB you can then probably also attach a (plain, little) MIDI controller for additional control. ....

so did I (Power off / Power on - fixed)
obviously a bug and not just a regular „hang up“ after fw upgrade

OK, finally it just took "quite a while (?)" before the download 0.6.1 became available after I enabled the Debug Mode. But now the Firmware 0.6.1 was loaded and installed. After the firmware upgrade is complete, it is a "good idea" to power cycle the Wolfmix W1, because all colo...

I can't even get OUT of 0.5.0 to 0.6.1....OK - found the problem. Have to switch to DEBUG CHANNEL. My fault, sorry. But where to get 0.6.1? as a manual file download and then upload thru the computer (Upload FW bundle)? or "online" via "FIRMWARE UPDATE" button while in DEBUG MODE?

Because, when I just "near" the numbers (calculating 58/255=23%), I NEVER get a smooth moving as if I get it with Airstream Pro, even if I go up and down a little around 23%. Fact is, I never get it right and I suspect the % values as I don't know if I match the "real numbers" I ...

When selecting MOVE FX Tilt Prog, I see the "position" buttons (4 for Center, 2 for Up, 2 for down, left, right ...etc). Can I somehow edit these positions? I noticed that when selecting UP, my Moving Heads do NOT reach the max Limit, previously set by Moving Head Limiting Area. When using...

When installing Beta (thru Debug mode), can I "revert" to official release, if Beta (for me) shows problems?