Wolfmix

I am not allowed to upload files/videos larger 500kB. I am not able to create a video of that size. Try yourself and copy a Preset to another location! Select PRESET page Now hold (keep holding!) the SHIFT button Now while still holding SHIFT, select the Preset you want to copy FROM (source) (it sta...

Rollback can be accomplished to v 1.0.0 using (latest) WTOOLS v. 1.5.3
(forget the "BETA" tag, its irrelevant)

It can become a bit "complex" to remote control Wolfmix wireless. Wolfmix itself has NO communication protocols imbedded (beside MIDI), that is why we use WTOOLS as the "communication link" between a network (Cloud) and the device. WTOOLS also has no "remote control" AP...

When in PRESET page, while holding the SHIFT button, select the "from"-Preset, keep holding SHIFT and now select the "to"-Preset, finally confirm (push) the flashing Preset - done Make sure to empty the "previous" Preset slots, as they eventually can interfere with acti...

If it can't "reading the project from the controller" it could have 2 reasons: 1. try to RESET WTOOLS under "Settings" tab (something has "hang up"), or 2. insufficient power to the Wolfmix/WMX1. Even if the lights are "On" it eventually does not get enough po...

sure, if the fixtures are next to each other and you replace one now with a higher channel count, you "reach into" first channel of the next fixture/fogger. Delete both devices and reassign one by one using the correct channel modes and you are set. Another possibility could be a false Fog...

Wolfmix W1 mkII has a MIDI implementation, which can read MIDI Clock as well as trigger Presets by sending MIDI notes. The Preset itself then can be defined to be active by a predefined SYNC value (i.e. 16 bars or 32 bars, or ...) You have the DMX Effect speed via MIDI Clock, Preset trigger via MIDI...

The profile needs to be "adjusted" to the Wolfmix "Automation". The profile as provided by Martin work on a simple manual FADER DESK without any automation. But Automation is adding some additional requirements, so the profile has to be "adjusted" to those. Try the atta...

Select COLOR (NOT ColorFX! - just COLOR). Hold SHIFT + press AMBER (you now entering the Color Picker). 1. select RGBW section (top of screen) - dial all 4 encoders to 0% (Red= 0%, Green=0%, Blue=0%, White=0%) 2. switch to RGBWAU section (top of screen) - dial AMBER to 100% Store the setting by pres...

Wolfmix/WMX1 has a "different concept", compared to most other DMX controllers. As most other DMX consoles start with static positions and then adding them up to create some dynamics out of (like a move or a fade) - Wolfmix/WMX1 already has all the dynamics preloaded into its Effect sectio...