Wolfmix

Got it - you are unable to load the profile to even SELECT the channel mode from, as (a total of) 1.000+ (chs) make Wolfmix "choke" ( = not loading) giving: Error: Fixture Profile not added. Resync with WTOOLS to fix [OK] The "bad" part is that this profile is (officially) labell...

If you do NOT give an individual Preset a Color, then only the "global" 2 default Colors apply (for all "un-colored" Preset buttons) , which is "peach" for Toggle mode and "blue" for Flash mode

the change from toggle to flash was the ONLY variation of color you could have (from "peach" to "blue") on the older firmware. With the newer firmware you have much more colors now to select from when you want to change the color of the Preset button (regardless if it is toggle o...

you may want to enable the FLASH function on those Presets, which have been "blue-ish" instead of "peach" "Peach" indicates toggle function (On/Off), "Blue" is for "FLASH" functions (temporary) To get there you want to hold SHIFT and select the Prese...

sorry, my fault, overseen the wireless issue, thought it was a general malfunction of the RGBW Strobe fixture ...

You can do store Presets without active Colors. But you can NOT "stack up" Presets! So it won't help you to run one Preset and then "add" different Colors to it. Presets on Wolfmix are different and NOT just describing a Color or function and that being stored. A Preset - EVERY P...

misinterpreting the question - answer is not relevant to original question...

Are these fixtures exhibiting uncharacteristic behavior due to a firmware issue, or could there be another underlying cause for their erratic performance? Wolfmix is running perfect. Your fixture(s) most likely running perfect too. What is NOT optimized is the "glue" between the Wolfmix c...

Shane to solve your problem with Octostrip, I would suggest the following: 1. decide what Channel Mode you want to use. Wolfmix has a max of 1.024 adresses (4 universes x 512Ch) - so that is your max limit. If you want to use 208Ch mode (100cm) or 206Ch (50cm) - then you can only connect up to 4 Bar...

You do not ADD the Modes for the max Channel counts, as you only load ONE Mode at a time - THIS then defines the channel count. But it is true that those fixtures with high multiple functions (12x Tilt, 12x Zoom, 12x RGBW) the profiles need special attention and they are not ready out-of-the-box to ...