Wolfmix

It‘s all about the Profile! If it doesn‘t work as expected, you are either fix the Profile youself, editing the Profile accordingly with the Profile Builder, OR you open a ticket at Wolfmix Support and explain what is not working, so they eventually create a working Profile for you.

Wolfmix is smart when to open 2nd Gobo wheel. Example: Say you have 7 Gobos on the first wheel and 7 on the second wheel = total of 14 Gobos. Wolfmix is simply "counting up" the numbers of Gobos. So if you want to show the 4th Gobo from the 2nd Gobo wheel, Wolfmix "knows" it is G...

OK - for the "right" Color mapping, do the following: Select (static) Color and only edit the Starburst Group row! Go to the 1st Color Select page (Single 1-5) "Shift" Top button of that row (to make it Red). Now in Color Picker select RGBW - at the bottom of screen RED=100%, Gre...

it works - also you can (CAN! not must) use Move FX for rotation control via (moderate) Pan values. You have to edit the FIXTURE LIMITS for that, so it doesn't use the full 0 - 255 values, i.e. run full speed left rotation and next second run full speed right rotation, and your Starburst will litera...

I could give you my (working) Starburst Profile?

Profile has been updated ...

However .... :-) What I still don't understand is how I can configure a Multi Beam fixture to split, when the first channels only address Beam 1, the following addresses Beam 2 and now Strobe and/or Dimmer are unified controls and therefor assigned for both Beams (1+2). It will not split. If I confi...

I am generally not happy with the fixed strobe speeds (1%, 25%, 50% 75%, 100%). Some are too slow, others too fast, so I was challenging the development team to find a way to select individual speeds and also store them, as I want to recall them instantly and not redial again. There is a chance that...

Wolfmix is set to MAIN Dimmer level of 100%. Saving this state in a project. Next time when Wolfmix is started, it shows 100%, but when I also start WTOOL, after 10-12 seconds the Main Dimmer on Wolfmix switches to 20% - without doing anything. Just start WTOOLS and wait 10-12 seconds and it switche...

A fixture need to have a Color definition in the Profile (i.e. R, G, B channels) in order to respond to Wolf FX button. A Color WHEEL doesn't work, as the Wolf FX function is using additive Color mixture, which you can't do with a Color Wheel.

I was under the impression that your topic was more about the SPEED and Sync with Traktor? My issue is that when in Setup/Groups you "don't even have to click-to-select" the Flash selection (Wolf/Strobe/Blinder/Blackout) on the Group anymore - it is just AUTOSELECTED when you just highligh...