Search found 348 matches
- Tue Apr 02, 2024 8:11 am
- Forum: Wolfmix Owners Forum
- Topic: Preset colors preview on physical buttons not working
- Replies: 6
- Views: 266
Re: Preset colors preview on physical buttons not working
If you do NOT give an individual Preset a Color, then only the "global" 2 default Colors apply (for all "un-colored" Preset buttons) , which is "peach" for Toggle mode and "blue" for Flash mode
- Sat Mar 30, 2024 2:25 pm
- Forum: Wolfmix Owners Forum
- Topic: Preset colors preview on physical buttons not working
- Replies: 6
- Views: 266
Re: Preset colors preview on physical buttons not working
the change from toggle to flash was the ONLY variation of color you could have (from "peach" to "blue") on the older firmware. With the newer firmware you have much more colors now to select from when you want to change the color of the Preset button (regardless if it is toggle o...
- Sat Mar 30, 2024 8:49 am
- Forum: Wolfmix Owners Forum
- Topic: Preset colors preview on physical buttons not working
- Replies: 6
- Views: 266
Re: Preset colors preview on physical buttons not working
you may want to enable the FLASH function on those Presets, which have been "blue-ish" instead of "peach" "Peach" indicates toggle function (On/Off), "Blue" is for "FLASH" functions (temporary) To get there you want to hold SHIFT and select the Prese...
- Fri Mar 29, 2024 7:21 pm
- Forum: Wolfmix Owners Forum
- Topic: How to connect to CRMX Light
- Replies: 5
- Views: 465
Re: How to connect to CRMX Light
sorry, my fault, overseen the wireless issue, thought it was a general malfunction of the RGBW Strobe fixture ...
- Wed Mar 27, 2024 7:55 am
- Forum: Wolfmix Owners Forum
- Topic: Feature Request: Saving Presets without Colors
- Replies: 4
- Views: 503
Re: Feature Request: Saving Presets without Colors
You can do store Presets without active Colors. But you can NOT "stack up" Presets! So it won't help you to run one Preset and then "add" different Colors to it. Presets on Wolfmix are different and NOT just describing a Color or function and that being stored. A Preset - EVERY P...
- Wed Mar 27, 2024 7:44 am
- Forum: Wolfmix Owners Forum
- Topic: How to connect to CRMX Light
- Replies: 5
- Views: 465
Re: How to connect to CRMX Light
misinterpreting the question - answer is not relevant to original question...
- Tue Mar 26, 2024 5:01 pm
- Forum: Wolfmix Owners Forum
- Topic: Fixtures Behaving Badly.
- Replies: 2
- Views: 362
Re: Fixtures Behaving Badly.
Are these fixtures exhibiting uncharacteristic behavior due to a firmware issue, or could there be another underlying cause for their erratic performance? Wolfmix is running perfect. Your fixture(s) most likely running perfect too. What is NOT optimized is the "glue" between the Wolfmix c...
- Tue Mar 26, 2024 11:44 am
- Forum: Fixtures Behaving Badly
- Topic: Showtec octostrip mk2
- Replies: 6
- Views: 3781
Re: Showtec octostrip mk2
Shane to solve your problem with Octostrip, I would suggest the following: 1. decide what Channel Mode you want to use. Wolfmix has a max of 1.024 adresses (4 universes x 512Ch) - so that is your max limit. If you want to use 208Ch mode (100cm) or 206Ch (50cm) - then you can only connect up to 4 Bar...
- Tue Mar 26, 2024 9:09 am
- Forum: Fixtures Behaving Badly
- Topic: Showtec octostrip mk2
- Replies: 6
- Views: 3781
Re: Showtec octostrip mk2
You do not ADD the Modes for the max Channel counts, as you only load ONE Mode at a time - THIS then defines the channel count. But it is true that those fixtures with high multiple functions (12x Tilt, 12x Zoom, 12x RGBW) the profiles need special attention and they are not ready out-of-the-box to ...
- Tue Mar 26, 2024 8:02 am
- Forum: Wolfmix Owners Forum
- Topic: How configure RGBW inground in different zone...
- Replies: 2
- Views: 388
Re: How configure RGBW inground in different zone...
1. You have (and want) to have certain fixtures in different GROUPS (A;B;C;D....H), so you can put different Colors on 2. You even can apply 2 or more Colors on ONE GROUP of fixtures: In STATIC COLOR (NOT! ColorFX!!) - dial the Group rotary encoder from SINGLE to "ALTERNATE" (dot on/off/on...